CY2308SXC-4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Fanout Buffer (Distribution), Zero Delay Buffer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Clock Drivers |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY2308 |
| Output | LVCMOS |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 45mA |
| Frequency (Max) | 133.3MHz |
| Input | LVCMOS, LVTTL |
| Ratio - Input:Output | 1:8 |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Divider/Multiplier | No/Yes |
| Same Edge Skew-Max (tskwd) | 0.2 ns |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY2308SXC-4 Overview
Tube-method packaging is used for clock ICs. The 16-SOIC (0.154, 3.90mm Width) package embeds this Clock PLL. A maximum temperature of 260 can be sustained by this clock generator ic during reflowing. As you can see, it consists of 16 terminations. This time clock generator should be voltaged at 3.3V. A clock generator's input is called LVCMOS, LVTTL and it is designed as the input for this clock generator. To access the full performance of the electronic component, 1 circuits are implemented. An upper frequency limit of 133.3MHz Max can be achieved with this clock-based frequency synthesizer. Thanks to the Surface Mount, this electric component can easily be installed on a panel. The maximal supply voltage this clock generator would take is 3.6V. It is safe to use this frequency synthesizer with a supply voltage above 3V. Clock PLL works with 3V~3.6V supply voltage provided. Test statistics suggest setting the ambient temperature at 0°C~70°C, which is 0°C~70°C. In this case, we are dealing with a frequency synthesizer that can be used with LVCMOS logic levels. This is an electronic part that can be classified as a Fanout Buffer (Distribution), Zero Delay Buffer in this case. An IC that generates clocks specifically for microprocessors, this clock PLL is 16-bits in si16e. According to the base part number, its related parts can be founded. There are 16 pins that are available on the frequency generator. This time clock generator can handle a voltage of 3.3V as its supply voltage. As a result, it is commonly classified as a type of Clock Drivers clock PLL. The frequency synthesizer features 8 signal outputs to ensure as high a frequency as possible. The timing skew of this frequency synthesizer is low at 0.2 nsmax.
CY2308SXC-4 Features
Available in the 16-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY2308SXC-4 Applications
There are a lot of Cypress Semiconductor Corp CY2308SXC-4 Clock Generators applications.
- Microwave backhaul IF
- DVD recorders
- Space communucation
- Main oscillator in receiver
- Instrument
- Set-top boxes
- Phase modulation cellular systems
- Ports
- Cell phones
- Simple clock clean-up circuits
