CY2308SXC-4T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Fanout Buffer (Distribution), Zero Delay Buffer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Clock Drivers |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY2308 |
| Output | LVCMOS |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 45mA |
| Frequency (Max) | 133.3MHz |
| Input | LVCMOS, LVTTL |
| Ratio - Input:Output | 1:8 |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Divider/Multiplier | No/Yes |
| Same Edge Skew-Max (tskwd) | 0.2 ns |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY2308SXC-4T Overview
A clock integrated circuit is packaged in a Tape & Reel (TR)-shaped package because it is for use as a clock. This clock generator is embedded in the 16-SOIC (0.154, 3.90mm Width) package. In the reflowing process, this clock generator ic is able to maintain a maximum temperature of 260. 16 terminations can be found in frequency generators. A voltage of 3.3V should be applied to this electronic frequency generator. It is designed that the Clock PLL's input should be LVCMOS, LVTTL. A total of 1 circuits are implemented to access the full performance of the electrical part. There is a maximum frequency of 133.3MHz Max with this clock-based frequency generator. Thanks to the Surface Mount, this electric component can easily be installed on a panel. It would be possible to supply this clock PLL with 3.6V of power. It is safe to use this frequency synthesizer with a supply voltage above 3V. As long as you provide 3V~3.6V supply voltage, it will work. By calculating the test statistics, 0°C~70°C is the appropriate ambient temperature. LVCMOS logic levels are supported by this RF synthesizer. It is possible to classify this electronic component as a Fanout Buffer (Distribution), Zero Delay Buffer. There is a 16-bit clock-generating IC built specifically for microprocessors in this frequency generator. CY2308 is the base part number for finding related electronic parts. PF synthesizers is equipped with 16 pins. In terms of the supply voltage, PLL clock can handle 3.3V volts. A Clock Drivers clock generator is essentially what this device is. The output frequency can be amplified as high as possible with its 8 signal outputs. Low timing skew is provided by this analog clock generator at maximum 0.2 ns.
CY2308SXC-4T Features
Available in the 16-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY2308SXC-4T Applications
There are a lot of Cypress Semiconductor Corp CY2308SXC-4T Clock Generators applications.
- Mobile telephones
- Jitter reduction
- Radio receivers
- Communication infrastructure
- Antenna automatic tracking
- Signal modulation and demodulation
- Smartphones
- CPUs
- Clock synchronization
- Tracking filters
