CY2308SXI-1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 665.986997mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Fanout Buffer (Distribution), Zero Delay Buffer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Clock Drivers |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY2308 |
| Output | LVCMOS |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 45mA |
| Frequency (Max) | 133.3MHz |
| Input | LVCMOS, LVTTL |
| Ratio - Input:Output | 1:8 |
| PLL | Yes with Bypass |
| Differential - Input:Output | No/No |
| Same Edge Skew-Max (tskwd) | 0.2 ns |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY2308SXI-1 Overview
As a clock IC, PLLs is packaged using the Tube method. The 16-SOIC (0.154, 3.90mm Width) package includes this clock generator. Frequency generator can maintain a maximum temperature of 260 under reflowing conditions. There are 16 terminations found in this file. Basically, this time clock generator needs a voltage of 3.3V. There is a Clock PLL called LVCMOS, LVTTL which is designed to be the input to this clock generator. It is possible to access the full performance of the electrical part by implementing 1 circuits. Providing a maximum frequency of 133.3MHz, this clock-based RF synthesizer is suitable for a variety of applications. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. Clock PLL is capable of receiving a maximum of 3.6V as a supply voltage. A maximum voltage of 3V should be used for this frequency generator for safety reasons. Clock generators should operate with the voltage supply of 3V~3.6V. Based on the test statistics, an ambient temperature of -40°C~85°C should be set. LVCMOS is designed for clock generator's output. It has been classified as a Fanout Buffer (Distribution), Zero Delay Buffer electronic part, which means that it is a semiconductor. Microprocessor-specific clock PLL with 16 bits. This part number CY2308 is related to the following electrical components. Clock generator is designed with 16 pins. There is a maximum supply voltage of 3.3V that frequency generators can handle. Clock generator can also be included into Clock Drivers. Clock PLL is facilitated with 8 signal outputs to magnify output frequency as high as possible. Low timing skew is offered by this RF synthesizer at maximum 0.2 ns.
CY2308SXI-1 Features
Available in the 16-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY2308SXI-1 Applications
There are a lot of Cypress Semiconductor Corp CY2308SXI-1 Clock Generators applications.
- Remote telemetry and instrumentation
- Small signal recovery
- Digital circuits
- Wireless infrastructure
- Symbol synchronization
- 1 Gigabit Ethernet
- Closed circuit systems
- Computers to manage memory cards
- Tracking filters
- Automatic test equipment
