Parameters |
Subcategory |
Clock Drivers |
Voltage - Supply |
3V~3.6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Frequency |
133.33MHz |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
CY2308 |
Output |
LVCMOS |
Pin Count |
16 |
Number of Outputs |
8 |
Operating Supply Voltage |
3.3V |
Supply Voltage-Max (Vsup) |
3.6V |
Supply Voltage-Min (Vsup) |
3V |
Number of Circuits |
1 |
Nominal Supply Current |
70mA |
Frequency (Max) |
133.3MHz |
Input |
LVCMOS, LVTTL |
Ratio - Input:Output |
1:8 |
PLL |
Yes with Bypass |
Differential - Input:Output |
No/No |
Same Edge Skew-Max (tskwd) |
0.2 ns |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Contact Plating |
Gold, Tin |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Published |
1996 |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Type |
Fanout Buffer (Distribution), Zero Delay Buffer |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
CY2308SXI-1H Overview
Clock ICs are packaged using the Tube method. As part of the 16-SOIC (0.154, 3.90mm Width) package, this clock generator is embedded. This clock generator will sustain a maximum temperature of 260 when reflown. There are a total of 16 terminations in this file. Basically, this time clock generator needs a voltage of 3.3V. As the Clock PLL's input, LVCMOS, LVTTL is designed to be used in order to generate the clock signal. 1 circuits are used to achieve clock PLL's superior flexibility. The frequency generator has a maximum frequency of 133.3MHz. Thanks to the Surface Mount, this electric component can easily be installed on a panel. Clock generators can take up to 3.6V of power as a maximum supply voltageThis frequency synthesizer requires a supply voltage above 3V to be safe. There are 3V~3.6V different supply voltages that can be provided for this RF synthesizer. The ambient temperature should be set at -40°C~85°C, which is estimated by the test statistics. As the name suggests, this is a clock generator that is compatible with LVCMOS logic levels. Fanout Buffer (Distribution), Zero Delay Buffer is the type of electrical part that this component is classified as. An IC that generates clocks specifically for microprocessors, this clock PLL is 16-bits in si16e. According to the base part number CY2308, its related parts can be found. There is a 16 pin that is available on the frequency synthesizers. The maximum supply voltage that analog clock generator can handle is 3.3V. A Clock Drivers clock generator is essentially what this device is. 8 signal outputs allow for maximi8ation of output frequency. Low timing skew is offered by this RF synthesizer at maximum 0.2 ns. It is able to realize high efficiency when operating at a frequency of 133.33MHz.
CY2308SXI-1H Features
Available in the 16-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY2308SXI-1H Applications
There are a lot of Cypress Semiconductor Corp CY2308SXI-1H Clock Generators applications.
- High-speed communication applications
- Signal analyzer
- Wi-Fi routers
- Frequency synthesis
- Quenching?
- Clock generation systems
- Wide area power system
- Motor speed controls
- Notebooks
- CPUs