CY2308SXI-1HT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Fanout Buffer (Distribution), Zero Delay Buffer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Clock Drivers |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY2308 |
| Output | LVCMOS |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 70mA |
| Frequency (Max) | 133.3MHz |
| Input | LVCMOS, LVTTL |
| Ratio - Input:Output | 1:8 |
| PLL | Yes with Bypass |
| Differential - Input:Output | No/No |
| Same Edge Skew-Max (tskwd) | 0.2 ns |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY2308SXI-1HT Overview
As a clock IC, it uses the Tape & Reel (TR) package. Clock PLL is embedded in the 16-SOIC (0.154, 3.90mm Width) package. This clock generator ic can sustain 260 degrees of temperature during reflowing. As a result of this, we can find 16 terminations. This electronic frequency generator requires a voltage of 3.3V. LVCMOS, LVTTL is designed as this clock generator's input. 1 circuits are implemented to access the electronic component's full performance. The frequency generator has a maximum frequency of 133.3MHz. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. The maximal supply voltage this clock generator would take is 3.6V. The supply voltage (Vsup) should be kept above 3V for normal operation. As far as the supply voltage is concerned, clock PLL can be used with 3V~3.6V. Test statistics suggest setting the ambient temperature at -40°C~85°C, which is -40°C~85°C. The RF synthesizer is compatible with LVCMOS logic levels. As far as electrical parts go, this component can be classified as a Fanout Buffer (Distribution), Zero Delay Buffer component. Microprocessors are specifically designed to use this clock-generating IC, which has a 16-bit output. It is possible to find its related electronic parts by searching for the base part number CY2308. A 16 pin is available on the clock PLL. Electronic frequency generator can handle voltages up to 3.3V. Clock generator can also be included into Clock Drivers. 8 signal outputs are provided for enhancing output frequency as much as possible. At 0.2 ns Max, this analog clock generator exhibits low timing skew.
CY2308SXI-1HT Features
Available in the 16-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY2308SXI-1HT Applications
There are a lot of Cypress Semiconductor Corp CY2308SXI-1HT Clock Generators applications.
- Telecommunication systems
- Satellite navigation communication
- Microwave radio
- Electronic countermeasures
- Navigation, positioning and surveillance system for aircraft, ships and ships
- Wireless handsets
- Mechanical devices
- PMR (Professional Mobile Radio)
- Digital logic circuits
- Clock synchronization
