banner_page

CY2308SXI-1T

3.3V Fanout Buffer (Distribution), Zero Delay Buffer 133.3MHz CY2308 Clock Generators 16 Pins 16-SOIC (0.154, 3.90mm Width) 16 Terminals Surface Mount 3V~3.6V Tape & Reel (TR)


  • Manufacturer: Cypress Semiconductor Corp
  • Nocochips NO: 217-CY2308SXI-1T
  • Package: 16-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 462
  • Description: 3.3V Fanout Buffer (Distribution), Zero Delay Buffer 133.3MHz CY2308 Clock Generators 16 Pins 16-SOIC (0.154, 3.90mm Width) 16 Terminals Surface Mount 3V~3.6V Tape & Reel (TR) (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Contact Plating Gold, Tin
Mounting Type Surface Mount
Package / Case 16-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Number of Pins 16
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Published 2010
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 16
ECCN Code EAR99
Type Fanout Buffer (Distribution), Zero Delay Buffer
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Clock Drivers
Voltage - Supply 3V~3.6V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3.3V
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number CY2308
Output LVCMOS
Pin Count 16
Number of Outputs 8
Qualification Status Not Qualified
Operating Supply Voltage 3.3V
Supply Voltage-Max (Vsup) 3.6V
Supply Voltage-Min (Vsup) 3V
Number of Circuits 1
Nominal Supply Current 45mA
Frequency (Max) 133.3MHz
Input LVCMOS, LVTTL
Ratio - Input:Output 1:8
PLL Yes with Bypass
Differential - Input:Output No/No
Same Edge Skew-Max (tskwd) 0.2 ns
RoHS Status ROHS3 Compliant
Lead Free Lead Free

CY2308SXI-1T Overview


The Tape & Reel (TR) method is used for packaging clock ICs. 16-SOIC (0.154, 3.90mm Width) contains this Clock PLL. In the reflowing process, this clock generator ic is able to maintain a maximum temperature of 260. It contains 16 terminations that can be found in frequency synthesizer. A voltage of 3.3V should be applied to this electronic frequency generator. This Clock PLL will be fed by LVCMOS, LVTTL as its input. 1 circuits are used to achieve clock PLL's superior flexibility. An up to 133.3MHz frequency is provided by this clock-based RF synthesizer. Because of the Surface Mount, clock PLL can be easily mounted on the panel. The maximum voltage this clock PLL can handle is 3.6V. This frequency synthesizer requires a supply voltage above 3V to be safe. Clock generators should operate with the voltage supply of 3V~3.6V. By calculating the test statistics, -40°C~85°C is the appropriate ambient temperature. It's compatible with LVCMOS logic levels. This is an electronic part that can be classified as a Fanout Buffer (Distribution), Zero Delay Buffer in this case. Clock PLL is equipped with 16 pin count. This part number CY2308 is related to the following electrical components. It is possible to connect to the PLL via 16 pins. The maximum supply voltage that analog clock generator can handle is 3.3V. The device is usually classified as a type of Clock Drivers device. The output frequency can be magnified as high as possible with the assistance of 8 signal outputs. Low timing skew is offered by this RF synthesizer at maximum 0.2 ns.

CY2308SXI-1T Features


Available in the 16-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V

CY2308SXI-1T Applications


There are a lot of Cypress Semiconductor Corp CY2308SXI-1T Clock Generators applications.

  • Remote telemetry and instrumentation
  • Line cards used in telephone exchange
  • Phase modulation cellular systems
  • Navigation, positioning and surveillance system for aircraft, ships and ships
  • Laptops
  • CB radios
  • Clock generation systems
  • Multi-function printers
  • Digital logic circuits
  • Microwave backhaul IF

Write a review

Note: HTML is not translated!
    Bad           Good