Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Gold, Tin |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
Weight |
665.986997mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Published |
1996 |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Type |
Fanout Buffer (Distribution), Zero Delay Buffer |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Clock Drivers |
Voltage - Supply |
3V~3.6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Frequency |
133.33MHz |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
CY2308 |
Output |
LVCMOS |
Pin Count |
16 |
Number of Outputs |
8 |
Operating Supply Voltage |
3.3V |
Supply Voltage-Max (Vsup) |
3.6V |
Supply Voltage-Min (Vsup) |
3V |
Number of Circuits |
1 |
Nominal Supply Current |
45mA |
Frequency (Max) |
133.3MHz |
Input |
LVCMOS, LVTTL |
Ratio - Input:Output |
1:8 |
PLL |
Yes |
Differential - Input:Output |
No/No |
Divider/Multiplier |
Yes/Yes |
Same Edge Skew-Max (tskwd) |
0.2 ns |
Height |
1.48mm |
Length |
9.98mm |
Width |
3.9mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
CY2308SXI-2 Overview
Clock generator is packaged in the way of Tube. Embedded in the 16-SOIC (0.154, 3.90mm Width) package is this Clock PLL. Frequency generator is capable of operating at a maximum temperature of 260 when reflowing. In it, there are 16 terminations to be found. For this clock generator ic, a voltage of 3.3V is required. There is a Clock PLL called LVCMOS, LVTTL which is designed to be the input to this clock generator. 1 circuits are implemented to access the electronic component's full performance. Providing a maximum frequency of 133.3MHz, this clock-based RF synthesizer is suitable for a variety of applications. Surface Mount-slots make it easy to mount this electronic component on panels. The maximal supply voltage this clock generator would take is 3.6V. Keeping the supply voltage for this frequency synthesizer above 3V is recommended for safety reasons. As far as the supply voltage is concerned, clock PLL can be used with 3V~3.6V. By calculating the test statistics, -40°C~85°C is the appropriate ambient temperature. The RF synthesizer is compatible with LVCMOS logic levels. It has been classified as a Fanout Buffer (Distribution), Zero Delay Buffer electronic part, which means that it is a semiconductor. There is a 16-bit clock-generating IC built specifically for microprocessors in this frequency generator. This part number is related to its related electronic parts. It is possible to connect to the PLL via 16 pins. Clock PLL is capable of handling a voltage of 3.3V. In general, this clock PLL is considered a Clock Drivers device. Clock PLL is facilitated with 8 signal outputs to magnify output frequency as high as possible. This clock generator offers low timing skew at 0.2 ns Max. At 133.33MHz, frequency synthesizer achieves high efficiency.
CY2308SXI-2 Features
Available in the 16-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY2308SXI-2 Applications
There are a lot of Cypress Semiconductor Corp CY2308SXI-2 Clock Generators applications.
- Various decoding circuits
- Cellular/4G
- Computers to manage memory cards
- DVD recorders
- FM demodulation networks for FM operations
- Melting
- Broadcast communication
- Modems
- Simple clock clean-up circuits
- MRI