CY2308SXI-3
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Fanout Buffer (Distribution), Zero Delay Buffer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Clock Drivers |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY2308 |
| Output | LVCMOS |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 45mA |
| Frequency (Max) | 133.3MHz |
| Input | LVCMOS, LVTTL |
| Ratio - Input:Output | 1:8 |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Divider/Multiplier | No/Yes |
| Same Edge Skew-Max (tskwd) | 0.2 ns |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY2308SXI-3 Overview
The Tube method is used for packaging clock ICs. Embedded in the 16-SOIC (0.154, 3.90mm Width) package is this Clock PLL. The frequency generator is capable of withstanding a maximum temperature of 260 during reflowing. As you can see, it consists of 16 terminations. To operate this time clock generator, 3.3V voltage should be applied. As the Clock PLL's input, LVCMOS, LVTTL is designed to be used in order to generate the clock signal. There are 1 circuits implemented in order to achieve full performance from this electronic part. Using this clock-based frequency synthesizer, you can achieve a maximum frequency of 133.3MHz. PLL clock is mounted in the way of Surface Mount. 3.6V would be the maximum supply voltage for this clock generator. The supply voltage (Vsup) should be kept above 3V for normal operation. As far as the supply voltage is concerned, clock PLL can be used with 3V~3.6V. Based on test statistics, ambient temperature should be set at -40°C~85°C. LVCMOS is designed for clock generator's output. It is possible to classify this electronic component as a Fanout Buffer (Distribution), Zero Delay Buffer. There is a 16-bit clock-generating IC built specifically for microprocessors in this frequency generator. According to the base part number CY2308, its related parts can be found. There are a number of 16 pins that are available on the frequency synthesizers. There is a maximum supply voltage of 3.3V that electronic frequency generator can handle. The device is usually classified as a type of Clock Drivers device. The output frequency is magnified as high as possible with 8 signal outputs. This clock generator offers low timing skew at 0.2 ns Max.
CY2308SXI-3 Features
Available in the 16-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY2308SXI-3 Applications
There are a lot of Cypress Semiconductor Corp CY2308SXI-3 Clock Generators applications.
- Telecommunication systems
- Quenching?
- CB radios
- Antenna automatic tracking
- Media broadcast servers
- Wireless base station for LTE, LTE-advanced
- Satellite navigation communication
- Wi-Fi routers
- Sampling clocks for ADC and DAC
- Wide area power system
