CY2308ZI-1H
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Fanout Buffer (Distribution), Zero Delay Buffer |
| Terminal Finish | TIN/LEAD (SN/PB) |
| Subcategory | Clock Drivers |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 133MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY2308 |
| Output | LVCMOS |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 70mA |
| Frequency (Max) | 133.3MHz |
| Input | LVCMOS, LVTTL |
| Ratio - Input:Output | 1:8 |
| PLL | Yes with Bypass |
| Differential - Input:Output | No/No |
| Same Edge Skew-Max (tskwd) | 0.2 ns |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
CY2308ZI-1H Overview
This clock IC is packaged using the Tube method. As part of the 16-TSSOP (0.173, 4.40mm Width) package, this clock generator is embedded. The frequency generator is capable of withstanding a maximum temperature of 240 during reflowing. As a result, frequency synthesizers can be found to contain 16 terminations. This time clock generator should be voltaged at 3.3V. LVCMOS, LVTTL is designed for clock generator's input. An implementation of 1 circuits is required in order to fully utili1e the capabilities of the electrical part. Using this clock-based frequency synthesizer, you can achieve a maximum frequency of 133.3MHz. Surface Mount-slots make it easy to mount this electronic component on panels. It would be possible to supply this clock PLL with 3.6V of power. The supply voltage (Vsup) should be kept above 3V for normal operation. There are 3V~3.6V available for use with this clock PLL. Based on test statistics, ambient temperature should be set at -40°C~85°C. LVCMOS is designed for clock generator's output. It has been classified as a Fanout Buffer (Distribution), Zero Delay Buffer electronic part, which means that it is a semiconductor. Microprocessor-specific clock PLL with 16 bits. This part number CY2308 is related to the following electrical components. The frequency synthesizer has 16 pins that are available. Supply voltage 3.3V is what clock generator can handle. As a result, it is commonly classified as a type of Clock Drivers clock PLL. The frequency synthesizer features 8 signal outputs to ensure as high a frequency as possible. The maximal same edge skew (tskwd) can not be exceeded. Frequency generator is able to reali133MHze high efficiency when operating at a frequency of 133MHz.
CY2308ZI-1H Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY2308ZI-1H Applications
There are a lot of Cypress Semiconductor Corp CY2308ZI-1H Clock Generators applications.
- Signal analyzer
- Coherent carrier tracking
- Cell phones
- Antenna automatic tracking
- FM demodulation networks for FM operations
- Wireless infrastructure
- Small signal recovery
- Aerospace and defense
- Microprocessor clock multipliers
- Signal modulation and demodulation
