CY2308ZXC-1H
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Fanout Buffer (Distribution), Zero Delay Buffer |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Clock Drivers |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 133.3MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY2308 |
| Output | LVCMOS |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 70mA |
| Max Supply Current | 70mA |
| Input | LVCMOS, LVTTL |
| Ratio - Input:Output | 1:8 |
| PLL | Yes with Bypass |
| Differential - Input:Output | No/No |
| Same Edge Skew-Max (tskwd) | 0.2 ns |
| Height | 950μm |
| Length | 5.1mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY2308ZXC-1H Overview
A clock integrated circuit is packaged in a Tube-shaped package because it is for use as a clock. The 16-TSSOP (0.173, 4.40mm Width) package embeds this Clock PLL. In the reflowing process, this clock generator ic is able to maintain a maximum temperature of 260. In it, there are 16 terminations to be found. Basically, a voltage of 3.3V should be applied to this electronic frequency generator. As the Clock PLL's input, LVCMOS, LVTTL is designed to be used in order to generate the clock signal. To access the full performance of the electronic component, 1 circuits are implemented. The Surface Mount allows the electrical component to be installed conveniently on the panel. Approximately 3.6V is the maximum supply voltage needed by this time clock generator. It is safe to use this frequency synthesizer with a supply voltage above 3V. Clock generator ic works with 3V~3.6V. Statistics suggest that the ambient temperature be set at 0°C~70°C, which is what is estimated by the test. LVCMOS is designed for clock generator's output. As far as electrical parts go, this component can be classified as a Fanout Buffer (Distribution), Zero Delay Buffer component. This clock-generating IC is a 16-bit device designed explicitly for microprocessors. CY2308 is the base part number for finding related electronic parts. There are 16 pins on the frequency generator that are available for use. Electronic frequency generator can handle voltages up to 3.3V. Clock Drivers-type frequency generators are usually classified as this type. 8 signal outputs are provided for enhancing output frequency as much as possible. At maximum 0.2 ns, this analog clock generator has low timing skew. At a frequency of 133.3MHz, the system can achieve high efficiency. During these clock generator operations, the maximum current supplied reaches 70mA.
CY2308ZXC-1H Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY2308ZXC-1H Applications
There are a lot of Cypress Semiconductor Corp CY2308ZXC-1H Clock Generators applications.
- Symbol synchronization
- Precision auxiliary angle deflection measurement
- Multi-function printers
- Notebooks
- Wireless infrastructure
- 10 Gigabit Ethernet
- Reference signals to RF systems
- VSAT (Small Ground Satellite Station)
- Set-top boxes
- Modems
