CY2308ZXC-1HT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Fanout Buffer (Distribution), Zero Delay Buffer |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Clock Drivers |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY2308 |
| Output | LVCMOS |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 70mA |
| Frequency (Max) | 133.3MHz |
| Input | LVCMOS, LVTTL |
| Ratio - Input:Output | 1:8 |
| PLL | Yes with Bypass |
| Differential - Input:Output | No/No |
| Same Edge Skew-Max (tskwd) | 0.2 ns |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY2308ZXC-1HT Overview
A clock integrated circuit is packaged in a Tape & Reel (TR)-shaped package because it is for use as a clock. The 16-TSSOP (0.173, 4.40mm Width) package includes this clock generator. Frequency generator can maintain a maximum temperature of 260 under reflowing conditions. As you can see, it consists of 16 terminations. This time clock generator should be voltaged at 3.3V. This Clock PLL will be fed by LVCMOS, LVTTL as its input. To access the full performance of the electronic component, 1 circuits are implemented. Providing a maximum frequency of 133.3MHz, this clock-based RF synthesizer is suitable for a variety of applications. Surface Mount-slots make it easy to mount this electronic component on panels. There is a maximum voltage of 3.6V for this clock generator. For safety reasons, this frequency generator's supply voltage should remain above 3V. This clock PLL works with a supply voltage of 3V~3.6V. Test statistics estimate a temperature of 0°C~70°C, which should be set as the ambient temperature. I would like to present to you a frequency synthesizer that is compatible with LVCMOS logic levels. This is an electronic part that can be classified as a Fanout Buffer (Distribution), Zero Delay Buffer in this case. In this IC, a 16-bit frequency generator is designed specifically for use in microprocessors. This part number is related to its related electronic parts. PF synthesizers is equipped with 16 pins. Supply voltage 3.3V is what time clock generator can handle. As a result, it is commonly classified as a type of Clock Drivers clock PLL. The timing skew of this frequency synthesizer is low at 0.2 nsmax.
CY2308ZXC-1HT Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY2308ZXC-1HT Applications
There are a lot of Cypress Semiconductor Corp CY2308ZXC-1HT Clock Generators applications.
- Precision auxiliary angle deflection measurement
- Set-top boxes
- Automatic test equipment
- Reference signals to RF systems
- Myriad digital applications
- Wi-Fi routers
- Satellite receivers
- Multiplexing communication
- Wireless infrastructure
- Mechanical devices
