CY2308ZXI-1H
| Parameters | |
|---|---|
| Same Edge Skew-Max (tskwd) | 0.2 ns |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Fanout Buffer (Distribution), Zero Delay Buffer |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Clock Drivers |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 133.33MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY2308 |
| Output | LVCMOS |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 70mA |
| Frequency (Max) | 133.3MHz |
| Input | LVCMOS, LVTTL |
| Ratio - Input:Output | 1:8 |
| PLL | Yes with Bypass |
| Differential - Input:Output | No/No |
CY2308ZXI-1H Overview
As a clock IC, PLLs is packaged using the Tube method. 16-TSSOP (0.173, 4.40mm Width) contains this Clock PLL. This clock generator ic can sustain 260 degrees of temperature during reflowing. As a result of this, we can find 16 terminations. This electronic frequency generator requires a voltage of 3.3V. This clock generator receives its inputs from LVCMOS, LVTTL, which is designed to be the clock source. To access the full performance of the electronic component, 1 circuits are implemented. It provides a maximum frequency of 133.3MHz. PLL clock is mounted in the way of Surface Mount. Clock generators can take up to 3.6V of power as a maximum supply voltageThe supply voltage for this frequency synthesizer should be kept above 3V for safety considerations. Clock generators should operate with the voltage supply of 3V~3.6V. Based on test statistics, ambient temperature should be set at -40°C~85°C. This is a clock generator compatible with LVCMOS logic levels. This electronic component can be classified into Fanout Buffer (Distribution), Zero Delay Buffer. An IC that generates clocks specifically for microprocessors, this clock PLL is 16-bits in si16e. According to the base part number CY2308, its related parts can be found. There are 16 pins that are available on the clock PLL. Time clock generator can handle a voltage of 3.3V as the supply voltage. The clock PLL is generally classified as a Clock Drivers device. The output frequency can be amplified as high as possible with its 8 signal outputs. Low timing skew is provided by this analog clock generator at maximum 0.2 ns. At a frequency of 133.33MHz, the system can achieve high efficiency.
CY2308ZXI-1H Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY2308ZXI-1H Applications
There are a lot of Cypress Semiconductor Corp CY2308ZXI-1H Clock Generators applications.
- Test and instrumentation equipment
- Automatic test equipment
- Radio receivers
- Precision auxiliary angle deflection measurement
- Telecommunication systems
- Line cards used in telephone exchange
- Signal analyzer
- DVD add-on cards for multimedia PCs
- PCI express cards
- Various decoding circuits
