CY2309CSXC-1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Type | Fanout Buffer (Distribution), Zero Delay Buffer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Clock Drivers |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY2309 |
| Output | LVCMOS |
| Pin Count | 16 |
| Number of Outputs | 9 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 32mA |
| Max Supply Current | 32mA |
| Frequency (Max) | 133.33MHz |
| Input | LVCMOS, LVTTL |
| Ratio - Input:Output | 1:9 |
| Max I(ol) | 0.008 A |
| PLL | Yes with Bypass |
| Differential - Input:Output | No/No |
| Propagation Delay (tpd) | 8.7 ns |
| Same Edge Skew-Max (tskwd) | 0.2 ns |
| Height | 1.478mm |
| Length | 9.98mm |
| Width | 3.987mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY2309CSXC-1 Overview
Tube-method packaging is used for clock ICs. This clock generator is embedded in the 16-SOIC (0.154, 3.90mm Width) package. A maximum temperature of 260 can be sustained by this clock generator ic during reflowing. It contains a total of 16 terminations within RF synthesizer. The clock generator ic should be grounded with a voltage of 3.3V. In this clock generator, LVCMOS, LVTTL is used as the input to the clock. To access the electronic component's full performance, 1 circuits are implemented. This clock-based frequency generator provides a frequency up to 133.33MHz Max. This component can be conveniently installed on the panel thanks to the Surface Mount. This clock generator would require a maximum supply voltage of 3.6V. A maximum voltage of 3V should be used for this frequency generator for safety reasons. In terms of supply voltage, RF synthesizer works with 3V~3.6V. Based on the test statistics, an ambient temperature of 0°C~70°C should be set. The frequency synthesizer in this product is compatible with all levels of LVCMOS logic. An electrical part such as this one can be classified as a Fanout Buffer (Distribution), Zero Delay Buffer component. In particular, this clock PLL is designed to be used with microprocessors. This part number CY2309 is related to the following electrical components. PF synthesizers is equipped with 16 pins. PLL clock can handle a voltage of 3.3V as its supply voltage. And basically, this clock generator is often classified as a kind of Clock Drivers. 9 signal outputs allow for maximi9ation of output frequency. There is a low timing skew at 0.2 nsmax with this RF synthesizer. It is possible to supply up to 32mA of current for this clock generator operation.
CY2309CSXC-1 Features
Available in the 16-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY2309CSXC-1 Applications
There are a lot of Cypress Semiconductor Corp CY2309CSXC-1 Clock Generators applications.
- Medical equipment
- Camera systems
- Antenna automatic tracking
- Skew suppression
- 1 Gigabit Ethernet
- Test equipment
- Symbol synchronization
- GPS systems
- Digital logic circuits
- Pagers
