CY2309CSXC-1H
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Type | Fanout Buffer (Distribution), Zero Delay Buffer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Clock Drivers |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY2309 |
| Output | LVCMOS |
| Pin Count | 16 |
| Number of Outputs | 9 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 32mA |
| Frequency (Max) | 133.33MHz |
| Input | LVCMOS, LVTTL |
| Ratio - Input:Output | 1:9 |
| PLL | Yes with Bypass |
| Differential - Input:Output | No/No |
| Propagation Delay (tpd) | 8.7 ns |
| Same Edge Skew-Max (tskwd) | 0.2 ns |
| Height | 1.48mm |
| Length | 9.98mm |
| Width | 3.99mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY2309CSXC-1H Overview
Clock ICs are packaged using the Tube method. A Clock PLL is included with the 16-SOIC (0.154, 3.90mm Width) package. The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible. There are 16 terminations found in this file. Basically, this time clock generator needs a voltage of 3.3V. This Clock PLL will be fed by LVCMOS, LVTTL as its input. There are 1 circuits implemented in order to achieve full performance from this electronic part. Providing a maximum frequency of 133.33MHz, this clock-based RF synthesizer is suitable for a variety of applications. PLL clock is mounted in the way of Surface Mount. 3.6V would be the maximum supply voltage for this clock generator. Safety considerations dictate that the supply voltage for this frequency synthesizer should be greater than 3V. There are 3V~3.6V available for use with this clock PLL. The ambient temperature should be set at 0°C~70°C, which is estimated by the test statistics. As the name suggests, this is a clock generator that is compatible with LVCMOS logic levels. This electronic component can be classified into Fanout Buffer (Distribution), Zero Delay Buffer. There is a 16-bit clock-generating IC built specifically for microprocessors in this frequency generator. This part number CY2309 is related to the following electrical components. There is an available 16 pin on the PLL. RF synthesizers can handle a voltage of 3.3V as the supply voltage. Clock Drivers-type frequency generators are usually classified as this type. 9 signal outputs are provided for enhancing output frequency as much as possible. At maximum 0.2 ns, this analog clock generator has low timing skew.
CY2309CSXC-1H Features
Available in the 16-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY2309CSXC-1H Applications
There are a lot of Cypress Semiconductor Corp CY2309CSXC-1H Clock Generators applications.
- FSK demodulators
- Pulsed digital systems
- Smartphones
- Wireless base station for LTE, LTE-advanced
- Mixed mode (analog and digital) applications
- Aerospace and defense
- Wide area power system
- Simple clock clean-up circuits
- Digital circuits
- Test equipment
