CY2309CSXI-1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Type | Fanout Buffer (Distribution), Zero Delay Buffer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Clock Drivers |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY2309 |
| Output | LVCMOS |
| Pin Count | 16 |
| Number of Outputs | 9 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Frequency (Max) | 133.33MHz |
| Input | LVCMOS, LVTTL |
| Ratio - Input:Output | 1:9 |
| Max I(ol) | 0.008 A |
| PLL | Yes with Bypass |
| Differential - Input:Output | No/No |
| Propagation Delay (tpd) | 8.7 ns |
| Same Edge Skew-Max (tskwd) | 0.2 ns |
| Height | 1.478mm |
| Length | 9.98mm |
| Width | 3.987mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY2309CSXI-1 Overview
Clock ICs are packaged using the Tube method. Embedded in the 16-SOIC (0.154, 3.90mm Width) package is this Clock PLL. This clock generator will sustain a maximum temperature of 260 when reflown. There are a total of 16 terminations in this file. A voltage of 3.3V should be applied to this electronic frequency generator. LVCMOS, LVTTL is designed for clock generator's input. A total of 1 circuits are implemented to access the full performance of the electrical part. Using this clock-based frequency synthesizer, you can achieve a maximum frequency of 133.33MHz. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. It would take a maximum supply voltage of 3.6V to operate this time clock generator. For safety reasons, this frequency generator's supply voltage should remain above 3V. As long as there are 3V~3.6V supply voltages provided, clock generator ic should work. Using the test statistics, we estimate that the ambient temperature should be -40°C~85°C. The frequency synthesizer in this product is compatible with all levels of LVCMOS logic. A Fanout Buffer (Distribution), Zero Delay Buffer is a classification for the electronic part in question. This clock-generating IC is a 16-bit device designed explicitly for microprocessors. The related electrical components for the base part number CY2309 can be found below. The frequency generator is equipped with 16 pins. There is a maximum supply voltage of 3.3V that clock generator can handle. A Clock Drivers clock generator is essentially what this device is. 9 signal outputs maximi9e the output frequency. Low timing skew is provided by this analog clock generator at maximum 0.2 ns. During this clock generator operation, a maximum current of 35mA is supplied.
CY2309CSXI-1 Features
Available in the 16-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY2309CSXI-1 Applications
There are a lot of Cypress Semiconductor Corp CY2309CSXI-1 Clock Generators applications.
- Wide area power system
- Aerospace and defense
- FMCW Radar
- Quenching?
- Mechanical devices
- Automatic control
- Signal analyzer
- VSAT (Small Ground Satellite Station)
- Mixed mode (analog and digital) applications
- Frequency Modulation (FM) stereo decoders
