Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Gold, Tin |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
0°C~70°C |
Packaging |
Tube |
Published |
2002 |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
16 |
Type |
Fanout Buffer (Distribution), Zero Delay Buffer |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Clock Drivers |
Voltage - Supply |
3V~3.6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
CY2309 |
Output |
LVCMOS |
Pin Count |
16 |
Number of Outputs |
9 |
Operating Supply Voltage |
3.3V |
Supply Voltage-Max (Vsup) |
3.6V |
Supply Voltage-Min (Vsup) |
3V |
Number of Circuits |
1 |
Nominal Supply Current |
32mA |
Frequency (Max) |
133.33MHz |
Input |
LVCMOS, LVTTL |
Ratio - Input:Output |
1:9 |
Max I(ol) |
0.008 A |
PLL |
Yes with Bypass |
Differential - Input:Output |
No/No |
Propagation Delay (tpd) |
8.7 ns |
Same Edge Skew-Max (tskwd) |
0.2 ns |
Length |
5mm |
Width |
4.4mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
CY2309CZXC-1 Overview
Clock ICs are packaged using the Tube method. Embedded in the 16-TSSOP (0.173, 4.40mm Width) package is this Clock PLL. When reflowed, this frequency generator can withstand a maximum temperature of 260. As a result of this, we can find 16 terminations. For this clock generator ic, a voltage of 3.3V is required. In this case, LVCMOS, LVTTL is designed to be the input of the clock generator. To access the full performance of the electronic component, 1 circuits are implemented. Using this clock-based frequency synthesizer, you can achieve a maximum frequency of 133.33MHz. Due to the Surface Mount-shape, this electronic component can be conveniently installed on the panel. There is a maximum voltage of 3.6V for this clock generator. For safety reasons, this frequency synthesizer should have a voltage supply above 3V. There should be 3V~3.6V provided with this RF synthesizer. Based on test statistics, ambient temperature should be set at 0°C~70°C. LVCMOS is designed for clock generator's output. It has been classified as a Fanout Buffer (Distribution), Zero Delay Buffer electronic part, which means that it is a semiconductor. There is a 16-bit clock-generating IC built specifically for microprocessors in this frequency generator. According to the base part number, its related parts can be founded. PLL is designed with 16 pins. The supply voltage should be maintained at 3.3V for high efficiency. Clock generator can also be included into Clock Drivers. Clock PLL is facilitated with 9 signal outputs to magnify output frequency as high as possible. This clock generator offers low timing skew at 0.2 ns Max.
CY2309CZXC-1 Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY2309CZXC-1 Applications
There are a lot of Cypress Semiconductor Corp CY2309CZXC-1 Clock Generators applications.
- Wireless base station for LTE, LTE-advanced
- FPGA and processor clocks
- DVD add-on cards for multimedia PCs
- Navigation, positioning and surveillance system for aircraft, ships and ships
- Camera systems
- Test equipment
- Threshold extension
- 10 Gigabit Ethernet
- Walkie-talkies
- Skew suppression