CY2309CZXC-1H
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Type | Fanout Buffer (Distribution), Zero Delay Buffer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Clock Drivers |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY2309 |
| Output | LVCMOS |
| Pin Count | 16 |
| Number of Outputs | 9 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 32mA |
| Frequency (Max) | 133.33MHz |
| Input | LVCMOS, LVTTL |
| Ratio - Input:Output | 1:9 |
| PLL | Yes with Bypass |
| Differential - Input:Output | No/No |
| Propagation Delay (tpd) | 8.7 ns |
| Same Edge Skew-Max (tskwd) | 0.2 ns |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY2309CZXC-1H Overview
In order to package it as a clock IC, the Tube package is used. This clock generator is embedded in the 16-TSSOP (0.173, 4.40mm Width) package. The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible. There are 16 terminations found in the file. The supply voltage of 3.3V allows for high efficiency. In this case, LVCMOS, LVTTL is designed to be the input of the clock generator. To access the full performance of the electronic component, 1 circuits are implemented. RF synthesizers based on this clock provide frequencies up to 133.33MHz maximum. Due to the Surface Mount-shape, this electronic component can be conveniently installed on the panel. The maximal supply voltage (Vsup) reaches 3.6V. In order to maintain safety, this frequency generator should be supplied with voltages above 3V. Clock generators should operate with the voltage supply of 3V~3.6V. Test statistics estimate a temperature of 0°C~70°C, which should be set as the ambient temperature. As the name suggests, this is a clock generator that is compatible with LVCMOS logic levels. A Fanout Buffer (Distribution), Zero Delay Buffer is a classification for the electronic part in question. In this IC, a 16-bit frequency generator is designed specifically for use in microprocessors. The related electronic parts of part number CY2309 are listed below. There are 16 pins that are available on the frequency generator. There is a maximum supply voltage of 3.3V that this analog clock generator can handle. Clock generator can also be included into Clock Drivers. The frequency synthesizer features 9 signal outputs to ensure as high a frequency as possible. Low timing skew is offered by this RF synthesizer at maximum 0.2 ns.
CY2309CZXC-1H Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY2309CZXC-1H Applications
There are a lot of Cypress Semiconductor Corp CY2309CZXC-1H Clock Generators applications.
- Picocells, femtocells and small cells
- Multiplexing communication
- Time to digital converters
- Clock generation systems
- Computers to manage memory cards
- CB radios
- Various decoding circuits
- Set-top boxes
- Broadcast communication
- Modems
