Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Gold, Tin |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
0°C~70°C |
Packaging |
Tape & Reel (TR) |
Published |
2002 |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
16 |
Type |
Fanout Buffer (Distribution), Zero Delay Buffer |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Clock Drivers |
Voltage - Supply |
3V~3.6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
CY2309 |
Output |
LVCMOS |
Pin Count |
16 |
Number of Outputs |
9 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
3.3V |
Supply Voltage-Max (Vsup) |
3.6V |
Supply Voltage-Min (Vsup) |
3V |
Number of Circuits |
1 |
Nominal Supply Current |
32mA |
Frequency (Max) |
133.33MHz |
Input |
LVCMOS, LVTTL |
Ratio - Input:Output |
1:9 |
Max I(ol) |
0.008 A |
PLL |
Yes with Bypass |
Differential - Input:Output |
No/No |
Propagation Delay (tpd) |
8.7 ns |
Same Edge Skew-Max (tskwd) |
0.2 ns |
Length |
5mm |
Width |
4.4mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
CY2309CZXC-1T Overview
As a clock IC, it uses the Tape & Reel (TR) package. In the 16-TSSOP (0.173, 4.40mm Width) package, there is an embedded clock generator. Under reflowing process, this clock generator ic is able to sustain a maximum temperature of 260. 16 terminations can be found in frequency generators. Clock generator ics require a voltage of 3.3V. The input of this clock generator is designed to be LVCMOS, LVTTL. A total of 1 circuits are implemented to access the full performance of the electrical part. RF synthesizers based on this clock provide frequencies up to 133.33MHz maximum. Thanks to the Surface Mount, this electric component can easily be installed on a panel. It would take a maximum supply voltage of 3.6V to operate this time clock generator. There should be a voltage supply above 3V for this frequency generator in order to ensure its safety. As long as there are 3V~3.6V supply voltages provided, clock generator ic should work. Based on the test statistics, an ambient temperature of 0°C~70°C should be set. The frequency synthesizer in this product is compatible with all levels of LVCMOS logic. This electronic component can be classified as a Fanout Buffer (Distribution), Zero Delay Buffer. It is a 16-bit IC that is designed for microprocessors specifically. The related electrical components for the base part number CY2309 can be found below. PLL is designed with 16 pins. RF synthesizers can handle voltages up to 3.3V. The clock PLL is generally classified as a Clock Drivers device. The frequency synthesizer features 9 signal outputs to ensure as high a frequency as possible. Low timing skew is provided by this analog clock generator at maximum 0.2 ns.
CY2309CZXC-1T Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY2309CZXC-1T Applications
There are a lot of Cypress Semiconductor Corp CY2309CZXC-1T Clock Generators applications.
- Peripheral devices
- Walkie-talkies
- Wireless base station for LTE, LTE-advanced
- Signal analyzer
- Microwave point-to-point systems
- Frequency shifting decodes
- Closed circuit systems
- Test and instrumentation equipment
- Broadcast communication
- Frequency synthesis