CY2309CZXI-1
| Parameters | |
|---|---|
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY2309 |
| Output | LVCMOS |
| Pin Count | 16 |
| Number of Outputs | 9 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 35mA |
| Frequency (Max) | 133.33MHz |
| Input | LVCMOS, LVTTL |
| Ratio - Input:Output | 1:9 |
| Max I(ol) | 0.008 A |
| PLL | Yes with Bypass |
| Differential - Input:Output | No/No |
| Propagation Delay (tpd) | 8.7 ns |
| Same Edge Skew-Max (tskwd) | 0.2 ns |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Type | Fanout Buffer (Distribution), Zero Delay Buffer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Clock Drivers |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
CY2309CZXI-1 Overview
As a clock IC, it uses the Tube package. Embedded in the 16-TSSOP (0.173, 4.40mm Width) package is this Clock PLL. A maximum temperature of 260 can be sustained by this clock generator ic during reflowing. There are a total of 16 terminations in this file. This time clock generator should be voltaged at 3.3V. It is designed that the Clock PLL's input should be LVCMOS, LVTTL. For a full understanding of the electronic part's performance, 1 circuits are implemented. Using this clock-based frequency synthesizer, you can achieve a maximum frequency of 133.33MHz. This component can be conveniently installed on the panel thanks to the Surface Mount. Approximately 3.6V is the maximum supply voltage needed by this time clock generator. This frequency synthesizer requires a supply voltage above 3V to be safe. In terms of supply voltage, RF synthesizer works with 3V~3.6V. Using the test statistics, it is estimated that the ambient temperature should be set to -40°C~85°C. As the name suggests, this is a clock generator that is compatible with LVCMOS logic levels. It is possible to classify this electronic component as a Fanout Buffer (Distribution), Zero Delay Buffer. This clock-generating IC is a 16-bit device designed explicitly for microprocessors. According to the base part number CY2309, its related parts can be found. A 16 pin is available on the clock PLL. Clock PLL is capable of handling a voltage of 3.3V. And basically, this clock generator is often classified as a kind of Clock Drivers. 9 signal outputs enable clock PLL to magnify output frequency as high as possible. The timing skew of this frequency synthesizer is low at 0.2 nsmax.
CY2309CZXI-1 Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY2309CZXI-1 Applications
There are a lot of Cypress Semiconductor Corp CY2309CZXI-1 Clock Generators applications.
- GPS systems
- Carrier synchronization in wired communication
- Precision auxiliary angle deflection measurement
- Picocells, femtocells and small cells
- Integrated phase noise in aerospace systems
- Medical equipment
- Walkie-talkies
- Simple clock clean-up circuits
- Set-top boxes
- High-speed optical transport network (OTN)
