Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Gold, Tin |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Published |
2011 |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
16 |
Type |
Fanout Buffer (Distribution), Zero Delay Buffer |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Clock Drivers |
Voltage - Supply |
3V~3.6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
CY2309 |
Output |
LVCMOS |
Pin Count |
16 |
Number of Outputs |
9 |
Operating Supply Voltage |
3.3V |
Supply Voltage-Max (Vsup) |
3.6V |
Supply Voltage-Min (Vsup) |
3V |
Number of Circuits |
1 |
Nominal Supply Current |
35mA |
Frequency (Max) |
133.33MHz |
Input |
LVCMOS, LVTTL |
Ratio - Input:Output |
1:9 |
PLL |
Yes with Bypass |
Differential - Input:Output |
No/No |
Propagation Delay (tpd) |
8.7 ns |
Same Edge Skew-Max (tskwd) |
0.2 ns |
Length |
5mm |
Width |
4.4mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
CY2309CZXI-1H Overview
In order to package it as a clock IC, the Tube package is used. Embedded in the 16-TSSOP (0.173, 4.40mm Width) package is this Clock PLL. Under reflowing process, this clock generator ic is able to sustain a maximum temperature of 260. It contains 16 terminations that can be found in frequency synthesizer. A voltage of 3.3V should be applied to this electronic frequency generator. This Clock PLL will be fed by LVCMOS, LVTTL as its input. For a full understanding of the electronic part's performance, 1 circuits are implemented. There is a maximum frequency of 133.33MHz Max with this clock-based frequency generator. The Surface Mount allows this electrical component to be easily installed on the panel. Clock generators can take up to 3.6V of power as a maximum supply voltageIn order to maintain safety, this frequency generator should be supplied with voltages above 3V. There are 3V~3.6V different supply voltages that can be provided for this RF synthesizer. The ambient temperature should be set at -40°C~85°C, which is estimated by the test statistics. It's compatible with LVCMOS logic levels. It has been classified as a Fanout Buffer (Distribution), Zero Delay Buffer electronic part, which means that it is a semiconductor. It is a 16-bit clock PLL designed specifically for microprocessors. The related electrical components for the base part number CY2309 can be found below. There are a number of 16 pins that are available on the clock generators. In terms of the supply voltage, analog clock generator can handle 3.3V volts. And basically, this clock generator is often classified as a kind of Clock Drivers. Clock PLL is facilitated with 9 signal outputs to magnify output frequency as high as possible. There is a low timing skew at 0.2 nsmax with this RF synthesizer.
CY2309CZXI-1H Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY2309CZXI-1H Applications
There are a lot of Cypress Semiconductor Corp CY2309CZXI-1H Clock Generators applications.
- FM demodulation networks for FM operations
- Local oscillators (LOs)
- Computers to manage memory cards
- Satellite receivers
- Threshold extension
- Televisions
- Small signal recovery
- Coherent carrier tracking
- Integrated phase noise in aerospace systems
- Main oscillator in receiver