Parameters |
Differential - Input:Output |
No/No |
Propagation Delay (tpd) |
8.7 ns |
Same Edge Skew-Max (tskwd) |
0.2 ns |
Length |
5mm |
Width |
4.4mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Contact Plating |
Gold, Tin |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Published |
2002 |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
16 |
Type |
Fanout Buffer (Distribution), Zero Delay Buffer |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Clock Drivers |
Voltage - Supply |
3V~3.6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
CY2309 |
Output |
LVCMOS |
Pin Count |
16 |
Number of Outputs |
9 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
3.3V |
Supply Voltage-Max (Vsup) |
3.6V |
Supply Voltage-Min (Vsup) |
3V |
Number of Circuits |
1 |
Nominal Supply Current |
35mA |
Frequency (Max) |
133.33MHz |
Input |
LVCMOS, LVTTL |
Ratio - Input:Output |
1:9 |
Max I(ol) |
0.008 A |
PLL |
Yes with Bypass |
CY2309CZXI-1T Overview
It is packaged using the Tape & Reel (TR) method since it is a clock IC. Embedded in the 16-TSSOP (0.173, 4.40mm Width) package is this Clock PLL. Frequency generator can maintain a maximum temperature of 260 under reflowing conditions. It contains 16 terminations that can be found in frequency synthesizer. To operate this time clock generator, 3.3V voltage should be applied. This clock generator receives its inputs from LVCMOS, LVTTL, which is designed to be the clock source. 1 circuits are used to achieve clock PLL's superior flexibility. Using this clock-based frequency synthesizer, you can achieve a maximum frequency of 133.33MHz. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. The maximal supply voltage this clock generator would take is 3.6V. A maximum voltage of 3V should be used for this frequency generator for safety reasons. As long as you provide 3V~3.6V supply voltage, it will work. By calculating the test statistics, -40°C~85°C is the appropriate ambient temperature. In this case, we are dealing with a frequency synthesizer that can be used with LVCMOS logic levels. As far as electrical parts go, this component can be classified as a Fanout Buffer (Distribution), Zero Delay Buffer component. It is a 16-bit IC that is designed for microprocessors specifically. These related electrical parts are available for the base part number CY2309. There is a 16 pin that is available on the digital clock generator. The supply voltage should be maintained at 3.3V for high efficiency. The clock PLL is generally classified as a Clock Drivers device. The output frequency is magnified as high as possible with 9 signal outputs. Low timing skew is provided by this analog clock generator at maximum 0.2 ns.
CY2309CZXI-1T Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY2309CZXI-1T Applications
There are a lot of Cypress Semiconductor Corp CY2309CZXI-1T Clock Generators applications.
- Satellite receivers
- Remote telemetry and instrumentation
- Tracking filters
- Radiotelephones
- Jitter reduction
- DVD recorders
- Bit synchronization
- HDD recorders
- Instrument
- Mechanical devices