CY2309SC-1
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Type | Fanout Buffer (Distribution), Zero Delay Buffer |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Clock Drivers |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Frequency | 133MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY2309 |
| Output | LVCMOS |
| Pin Count | 16 |
| Number of Outputs | 9 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 32mA |
| Frequency (Max) | 133.33MHz |
| Input | LVCMOS, LVTTL |
| Ratio - Input:Output | 1:9 |
| PLL | Yes with Bypass |
| Differential - Input:Output | No/No |
| Propagation Delay (tpd) | 8.7 ns |
| Same Edge Skew-Max (tskwd) | 0.25 ns |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
CY2309SC-1 Overview
As a clock IC, it uses the Tube package. 16-SOIC (0.154, 3.90mm Width) contains this Clock PLL. A maximum temperature of 240 can be sustained by this clock generator ic during reflowing. 16 terminations can be found in frequency generators. This electronic frequency generator requires a voltage of 3.3V. LVCMOS, LVTTL is designed for clock generator's input. To access the electronic component's full performance, 1 circuits are implemented. It provides a maximum frequency of 133.33MHz. Because of the Surface Mount, clock PLL can be easily mounted on the panel. 3.6V would be the maximum supply voltage for this clock generator. Keeping the supply voltage for this frequency synthesizer above 3V is recommended for safety reasons. In terms of supply voltage, RF synthesizer works with 3V~3.6V. The ambient temperature should be set at 0°C~70°C, which is estimated by the test statistics. LVCMOS is designed for clock generator's output. It is possible to classify this electronic component as a Fanout Buffer (Distribution), Zero Delay Buffer. In particular, this clock PLL is designed to be used with microprocessors. These related electrical parts are available for the base part number CY2309. The frequency synthesizer has 16 pins that are available. Supply voltage 3.3V is what clock generator can handle. Fundamentally, this is a kind of Clock Drivers clock PLL. The output frequency can be magnified as high as possible with the assistance of 9 signal outputs. Low timing skew is offered by this RF synthesizer at maximum 0.25 ns. By operating at a frequency of 133MHz, frequency generator is able to achieve high efficiency.
CY2309SC-1 Features
Available in the 16-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY2309SC-1 Applications
There are a lot of Cypress Semiconductor Corp CY2309SC-1 Clock Generators applications.
- Camera systems
- Microwave backhaul IF
- 1 Gigabit Ethernet
- Deep space exploration
- PMR (Professional Mobile Radio)
- Telecommunication systems
- 10 Gigabit Ethernet
- Symbol synchronization
- Clock recovery
- Coherent detection of the signal
