CY2309SXC-1HT
| Parameters | |
|---|---|
| Differential - Input:Output | No/No |
| Propagation Delay (tpd) | 8.7 ns |
| Same Edge Skew-Max (tskwd) | 0.25 ns |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Type | Fanout Buffer (Distribution), Zero Delay Buffer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Clock Drivers |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY2309 |
| Output | LVCMOS |
| Pin Count | 16 |
| Number of Outputs | 9 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 32mA |
| Frequency (Max) | 133.33MHz |
| Input | LVCMOS, LVTTL |
| Ratio - Input:Output | 1:9 |
| Max I(ol) | 0.008 A |
| PLL | Yes with Bypass |
CY2309SXC-1HT Overview
Tape & Reel (TR)-method packaging is used for clock ICs. In the 16-SOIC (0.154, 3.90mm Width) package, there is an embedded clock generator. This clock generator ic can sustain a maximum temperature of 260 during reflowing. It contains a total of 16 terminations within RF synthesizer. To operate this time clock generator, 3.3V voltage should be applied. A clock generator's input is called LVCMOS, LVTTL and it is designed as the input for this clock generator. It is possible to access the full performance of the electrical part by implementing 1 circuits. A clock-based RF synthesizer that provides a max frequency of 133.33MHz is available. Thanks to the Surface Mount, this electric component can easily be installed on a panel. It would be possible to supply this clock PLL with 3.6V of power. For safety reasons, this frequency generator's supply voltage should remain above 3V. There should be 3V~3.6V provided with this RF synthesizer. Using the test statistics, it is estimated that the ambient temperature should be set to 0°C~70°C. LVCMOS is designed for clock generator's output. This electronic component can be classified as a Fanout Buffer (Distribution), Zero Delay Buffer. In particular, this clock PLL is designed to be used with microprocessors. You can find related electrical components to the base part number CY2309. The frequency generator is equipped with 16 pins. RF synthesizers can handle a voltage of 3.3V as the supply voltage. The device is usually classified as a type of Clock Drivers device. 9 signal outputs allow for maximi9ation of output frequency. At 0.25 ns Max, this clock generator offers low timing skew.
CY2309SXC-1HT Features
Available in the 16-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY2309SXC-1HT Applications
There are a lot of Cypress Semiconductor Corp CY2309SXC-1HT Clock Generators applications.
- Satellite navigation communication
- Bit synchronization
- Electronic countermeasures
- Communication infrastructure
- Multiplexing communication
- Televisions
- Jitter reduction
- High-speed optical transport network (OTN)
- High-speed communication applications
- Fiber Channel
