CY2309SXC-1T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Type | Fanout Buffer (Distribution), Zero Delay Buffer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Clock Drivers |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY2309 |
| Output | LVCMOS |
| Pin Count | 16 |
| Number of Outputs | 9 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 32mA |
| Frequency (Max) | 133.33MHz |
| Input | LVCMOS, LVTTL |
| Ratio - Input:Output | 1:9 |
| Max I(ol) | 0.008 A |
| PLL | Yes with Bypass |
| Differential - Input:Output | No/No |
| Propagation Delay (tpd) | 8.7 ns |
| Same Edge Skew-Max (tskwd) | 0.25 ns |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY2309SXC-1T Overview
It is packaged using the Tape & Reel (TR) method since it is a clock IC. 16-SOIC (0.154, 3.90mm Width) contains this Clock PLL. In the reflowing process, this clock generator ic is able to maintain a maximum temperature of 260. There are 16 terminations found in the file. Basically, a voltage of 3.3V should be applied to this electronic frequency generator. A clock generator's input is called LVCMOS, LVTTL and it is designed as the input for this clock generator. For full access to the electronic component's capabilities, 1 circuits are implemented. It provides a maximum frequency of 133.33MHz. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. There is a maximum voltage of 3.6V for this clock generator. The supply voltage for this frequency synthesizer should be kept above 3V for safety considerations. There should be 3V~3.6V provided with this RF synthesizer. Test statistics suggest setting the ambient temperature at 0°C~70°C, which is 0°C~70°C. A frequency synthesizer which is compatible with the LVCMOS logic levels is presented here. This is an electronic part that can be classified as a Fanout Buffer (Distribution), Zero Delay Buffer in this case. It is a 16-bit clock PLL designed specifically for microprocessors. According to the base part number CY2309, its related parts can be found. There is an available 16 pin on the PLL. In terms of the supply voltage, analog clock generator can handle 3.3V volts. As such, it is often referred to as a kind of Clock Drivers clock PLL. Clock PLL is configured with 9 output. The timing skew of this frequency synthesizer is low at 0.25 nsmax.
CY2309SXC-1T Features
Available in the 16-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY2309SXC-1T Applications
There are a lot of Cypress Semiconductor Corp CY2309SXC-1T Clock Generators applications.
- Mechanical devices
- Wireless handsets
- Tracking filters
- Integrated phase noise in aerospace systems
- Communication infrastructure
- Broadcast communication
- Antenna automatic tracking
- Mobile telephones
- MRI
- Coherent carrier tracking
