CY2309SXI-1H
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 665.986997mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Type | Fanout Buffer (Distribution), Zero Delay Buffer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Clock Drivers |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Frequency | 133.33MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY2309 |
| Output | LVCMOS |
| Pin Count | 16 |
| Number of Outputs | 9 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 35mA |
| Input | LVCMOS, LVTTL |
| Ratio - Input:Output | 1:9 |
| Max I(ol) | 0.008 A |
| PLL | Yes with Bypass |
| Differential - Input:Output | No/No |
| Propagation Delay (tpd) | 8.7 ns |
| Same Edge Skew-Max (tskwd) | 0.25 ns |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY2309SXI-1H Overview
Clock ICs are packaged using the Tube method. Embedded in the 16-SOIC (0.154, 3.90mm Width) package is this Clock PLL. Frequency generator can maintain a maximum temperature of 260 under reflowing conditions. In it, there are 16 terminations to be found. This clock generator ic should receive a voltage of 3.3V. A clock generator's input is called LVCMOS, LVTTL and it is designed as the input for this clock generator. For full access to the electronic component's capabilities, 1 circuits are implemented. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. Approximately 3.6V is the maximum supply voltage needed by this time clock generator. In order to maintain safety, this frequency generator should be supplied with voltages above 3V. In terms of supply voltage, RF synthesizer works with 3V~3.6V. The ambient temperature should be set at -40°C~85°C, which is estimated by the test statistics. It's compatible with LVCMOS logic levels. Fanout Buffer (Distribution), Zero Delay Buffer is the type of electrical part that this component is classified as. Microprocessors are specifically designed to use this clock-generating IC, which has a 16-bit output. It is possible to find its related electronic parts by searching for the base part number CY2309. There is an available 16 pin on the clock generators. RF synthesizers can handle voltages up to 3.3V. In general, this clock PLL is considered a Clock Drivers device. The frequency synthesizer features 9 signal outputs to ensure as high a frequency as possible. At maximum 0.25 ns, this analog clock generator has low timing skew. When operated at 133.33MHz, frequency synthesizer achieves high efficiency.
CY2309SXI-1H Features
Available in the 16-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY2309SXI-1H Applications
There are a lot of Cypress Semiconductor Corp CY2309SXI-1H Clock Generators applications.
- Mixed mode (analog and digital) applications
- Fiber Channel
- Carrier synchronization in wired communication
- Signal generator
- Smartphones
- 10 Gigabit Ethernet
- Instrument
- Simple clock clean-up circuits
- Media broadcast servers
- Automatic control system test
