CY2309ZC-1H
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Type | Fanout Buffer (Distribution), Zero Delay Buffer |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Clock Drivers |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Frequency | 133MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | CY2309 |
| Output | LVCMOS |
| Pin Count | 16 |
| Number of Outputs | 9 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 32mA |
| Frequency (Max) | 133.33MHz |
| Input | LVCMOS, LVTTL |
| Ratio - Input:Output | 1:9 |
| PLL | Yes with Bypass |
| Differential - Input:Output | No/No |
| Propagation Delay (tpd) | 8.7 ns |
| Same Edge Skew-Max (tskwd) | 0.25 ns |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
CY2309ZC-1H Overview
It is packaged using the Tube method since it is a clock IC. As part of the 16-TSSOP (0.173, 4.40mm Width) package, this clock generator is embedded. The frequency generator is capable of withstanding a maximum temperature of 225 during reflowing. There are a total of 16 terminations in this file. This time clock generator should be voltaged at 3.3V. A clock generator's input is called LVCMOS, LVTTL and it is designed as the input for this clock generator. To access the electronic component's full performance, 1 circuits are implemented. Providing a maximum frequency of 133.33MHz, this clock-based RF synthesizer is suitable for a variety of applications. The Surface Mount allows the electrical component to be installed conveniently on the panel. Clock PLL is capable of receiving a maximum of 3.6V as a supply voltage. There should be a voltage supply above 3V for this frequency generator in order to ensure its safety. This clock PLL works with a supply voltage of 3V~3.6V. Statistics suggest that the ambient temperature be set at 0°C~70°C, which is what is estimated by the test. As the name suggests, this is a clock generator that is compatible with LVCMOS logic levels. An electrical part such as this one can be classified as a Fanout Buffer (Distribution), Zero Delay Buffer component. Microprocessor-specific clock PLL with 16 bits. According to the base part number, its related parts can be founded. It is possible to connect to the frequency generators via 16 pins. Supply voltage 3.3V is what clock generator can handle. The device is usually classified as a type of Clock Drivers device. 9 signal outputs allow for maximi9ation of output frequency. This clock generator offers low timing skew at 0.25 ns Max. High efficiency is achieved when operating at a frequency of 133MHz.
CY2309ZC-1H Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY2309ZC-1H Applications
There are a lot of Cypress Semiconductor Corp CY2309ZC-1H Clock Generators applications.
- FMCW Radar
- Cellular/4G
- Laptops
- Digital HDTV systems
- Fiber Channel
- 1 Gigabit Ethernet
- Integrated phase noise in aerospace systems
- Pulsed digital systems
- Various decoding circuits
- Skew suppression
