CY2309ZXC-1H
| Parameters | |
|---|---|
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Type | Fanout Buffer (Distribution), Zero Delay Buffer |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Clock Drivers |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 133.33MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY2309 |
| Output | LVCMOS |
| Pin Count | 16 |
| Number of Outputs | 9 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 32mA |
| Input | LVCMOS, LVTTL |
| Ratio - Input:Output | 1:9 |
| Max I(ol) | 0.008 A |
| PLL | Yes with Bypass |
| Differential - Input:Output | No/No |
| Propagation Delay (tpd) | 8.7 ns |
| Same Edge Skew-Max (tskwd) | 0.25 ns |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
CY2309ZXC-1H Overview
This clock IC is packaged using the Tube method. In the 16-TSSOP (0.173, 4.40mm Width) package, there is an embedded clock generator. In the reflowing process, this clock generator ic is able to maintain a maximum temperature of 260. 16 terminations can be found in frequency synthesizer. This time clock generator should be voltaged at 3.3V. This clock generator receives its inputs from LVCMOS, LVTTL, which is designed to be the clock source. 1 circuits are used to achieve clock PLL's superior flexibility. Surface Mount-slots make it easy to mount this electronic component on panels. It would be possible to supply this clock PLL with 3.6V of power. Safety considerations dictate that the supply voltage for this frequency synthesizer should be greater than 3V. This clock PLL works with a supply voltage of 3V~3.6V. Test statistics suggest setting the ambient temperature at 0°C~70°C, which is 0°C~70°C. There are several logic levels in LVCMOS logic that can be used with this clock generator. Fanout Buffer (Distribution), Zero Delay Buffer is the type of electrical part that this component is classified as. In this IC, a 16-bit frequency generator is designed specifically for use in microprocessors. CY2309 is the base part number for finding related electronic parts. It is possible to connect to the PLL via 16 pins. RF synthesizers can handle a voltage of 3.3V as the supply voltage. This clock generator can be classified as a kind of Clock Drivers in general. 9 signal outputs allow for maximi9ation of output frequency. This clock generator offers low timing skew at 0.25 ns Max. By operating at a frequency of 133.33MHz, frequency generator is able to achieve high efficiency.
CY2309ZXC-1H Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY2309ZXC-1H Applications
There are a lot of Cypress Semiconductor Corp CY2309ZXC-1H Clock Generators applications.
- Automatic test equipment
- Main oscillator in receiver
- Camera systems
- Telecommunication systems
- Digital circuits
- Radiotelephones
- Jitter reduction
- Phase modulation cellular systems
- Set-top boxes
- Vector network analyzers (VNA)
