Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Gold, Tin |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Published |
2002 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
16 |
Type |
Fanout Buffer (Distribution), Zero Delay Buffer |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Clock Drivers |
Voltage - Supply |
3V~3.6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.65mm |
Frequency |
133.33MHz |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
CY2309 |
Output |
LVCMOS |
Pin Count |
16 |
Number of Outputs |
9 |
Operating Supply Voltage |
3.3V |
Supply Voltage-Max (Vsup) |
3.6V |
Supply Voltage-Min (Vsup) |
3V |
Number of Circuits |
1 |
Nominal Supply Current |
35mA |
Input |
LVCMOS, LVTTL |
Ratio - Input:Output |
1:9 |
Max I(ol) |
0.008 A |
PLL |
Yes with Bypass |
Differential - Input:Output |
No/No |
Propagation Delay (tpd) |
8.7 ns |
Same Edge Skew-Max (tskwd) |
0.25 ns |
Length |
5mm |
Width |
4.4mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
CY2309ZXI-1H Overview
As a clock IC, PLLs is packaged using the Tube method. Embedded in the 16-TSSOP (0.173, 4.40mm Width) package is this Clock PLL. In the reflowing process, this clock generator ic is able to maintain a maximum temperature of 260. There are a total of 16 terminations in this file. To operate this time clock generator, 3.3V voltage should be applied. LVCMOS, LVTTL is designed for clock generator's input. A total of 1 circuits are implemented to access the full performance of the electrical part. Due to the Surface Mount-shape, this electronic component can be conveniently installed on the panel. It would be possible to supply this clock PLL with 3.6V of power. This frequency synthesizer requires a supply voltage above 3V to be safe. Clock generators should operate with the voltage supply of 3V~3.6V. Test statistics suggest setting the ambient temperature at -40°C~85°C, which is -40°C~85°C. LVCMOS is designed for clock generator's output. It is possible to classify this electronic component as a Fanout Buffer (Distribution), Zero Delay Buffer. An IC that generates clocks specifically for microprocessors, this clock PLL is 16-bits in si16e. According to the base part number CY2309, its related parts can be found. The frequency synthesizer has 16 pins that are available. PLL clock can handle a voltage of 3.3V as its supply voltage. Clock generator can also be included into Clock Drivers. Clock PLL is facilitated with 9 signal outputs to magnify output frequency as high as possible. The maximal same edge skew (tskwd) can not be exceeded. When operated at 133.33MHz, frequency synthesizer achieves high efficiency.
CY2309ZXI-1H Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY2309ZXI-1H Applications
There are a lot of Cypress Semiconductor Corp CY2309ZXI-1H Clock Generators applications.
- Radiotelephones
- Cable television converter boxes
- Televisions
- Quenching?
- VSAT (Small Ground Satellite Station)
- Reference signals to RF systems
- Aerospace and defense
- Space communucation
- CB radios
- Set-top boxes