CY23EP05SXC-1
| Parameters | |
|---|---|
| Base Part Number | CY23EP05 |
| Output | LVCMOS |
| Pin Count | 8 |
| Number of Outputs | 5 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 2.7V |
| Supply Voltage-Min (Vsup) | 2.3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 45mA |
| Max Supply Current | 45mA |
| Frequency (Max) | 133MHz 167MHz |
| Input | LVCMOS, LVTTL |
| Ratio - Input:Output | 1:5 |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Propagation Delay (tpd) | 0.2 ns |
| Height | 1.48mm |
| Length | 4.98mm |
| Width | 3.99mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Fanout Buffer (Distribution), Zero Delay Buffer |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES AT 3.3V SUPPLY |
| Subcategory | Clock Drivers |
| Voltage - Supply | 2.5V 3.3V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Frequency | 220MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
CY23EP05SXC-1 Overview
In order to package it as a clock IC, the Tube package is used. There is a clock generator embedded in the 8-SOIC (0.154, 3.90mm Width) package. The frequency generator is capable of withstanding a maximum temperature of 260 during reflowing. 8 terminations can be found in frequency synthesizer. The clock generator ic should be grounded with a voltage of 2.5V. It is designed that the Clock PLL's input should be LVCMOS, LVTTL. It is possible to access the full performance of the electrical part by implementing 1 circuits. There is a maximum frequency of 133MHz 167MHz Max with this clock-based frequency generator. The Surface Mount allows this electrical component to be easily installed on the panel. The maximum voltage this clock PLL can handle is 2.7V. There should be a voltage supply above 2.3V for this frequency generator in order to ensure its safety. As long as you provide 2.5V 3.3V supply voltage, it will work. By calculating the test statistics, 0°C~70°C is the appropriate ambient temperature. LVCMOS logic levels are supported by this RF synthesizer. An electrical part such as this one can be classified as a Fanout Buffer (Distribution), Zero Delay Buffer component. Microprocessor-specific clock PLL with 8 bits. CY23EP05 is the base part number for finding related electronic parts. There is a 8 pin that is available on the frequency synthesizers. The maximum supply voltage that clock generator can handle is 3.3V. Clock generator can also be included into Clock Drivers. In order to provide better clock signal output, this frequency synthesizer is equipped with ALSO OPERATES AT 3.3V SUPPLY. The output frequency is magnified as high as possible with 5 signal outputs. At 220MHz, frequency synthesizer achieves high efficiency. This RF synthesizer operation requires a maximum current of 45mA.
CY23EP05SXC-1 Features
Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 2.5V
Operating supply voltage of 3.3V
CY23EP05SXC-1 Applications
There are a lot of Cypress Semiconductor Corp CY23EP05SXC-1 Clock Generators applications.
- Wireless infrastructure
- High-speed communication applications
- Wide area power system
- Phase modulation cellular systems
- Electronic equipment
- Coherent carrier tracking
- Symbol synchronization
- Signal generator
- Pulsed digital systems
- Bit synchronization
