CY23EP05SXC-1H
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2001 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Fanout Buffer (Distribution), Zero Delay Buffer |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES AT 3.3V SUPPLY |
| Subcategory | Clock Drivers |
| Voltage - Supply | 2.5V 3.3V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Frequency | 220MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY23EP05 |
| Output | LVCMOS |
| Pin Count | 8 |
| Number of Outputs | 5 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 2.7V |
| Supply Voltage-Min (Vsup) | 2.3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 45mA |
| Frequency (Max) | 200MHz 220MHz |
| Input | LVCMOS, LVTTL |
| Ratio - Input:Output | 1:5 |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Propagation Delay (tpd) | 0.2 ns |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY23EP05SXC-1H Overview
As a clock IC, PLLs is packaged using the Tube method. There is a clock generator embedded in the 8-SOIC (0.154, 3.90mm Width) package. Frequency generator can maintain a maximum temperature of 260 under reflowing conditions. There are 8 terminations found in this file. Basically, this time clock generator needs a voltage of 2.5V. LVCMOS, LVTTL is designed as this clock generator's input. There are 1 circuits implemented in order to achieve full performance from this electronic part. This clock-based frequency generator provides a frequency up to 200MHz 220MHz Max. Because of the Surface Mount, clock PLL can be easily mounted on the panel. 2.7V would be the maximum supply voltage for this clock generator. For safety reasons, this frequency generator's supply voltage should remain above 2.3V. There are 2.5V 3.3V available for use with this clock PLL. Using the test statistics, we estimate that the ambient temperature should be 0°C~70°C. LVCMOS logic levels are supported by this RF synthesizer. This is an electronic part that can be classified as a Fanout Buffer (Distribution), Zero Delay Buffer in this case. This clock-generating IC is a 8-bit device designed explicitly for microprocessors. The related electronic parts of part number CY23EP05 are listed below. There are 8 pins that are available on the clock PLL. There is a maximum supply voltage of 3.3V that electronic frequency generator can handle. As a result, it is commonly classified as a type of Clock Drivers clock PLL. The frequency generator has a ALSO OPERATES AT 3.3V SUPPLY feature to improve the output of clock signals. 5 signal outputs maximi5e the output frequency. It is able to realize high efficiency when operating at a frequency of 220MHz.
CY23EP05SXC-1H Features
Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 2.5V
Operating supply voltage of 3.3V
CY23EP05SXC-1H Applications
There are a lot of Cypress Semiconductor Corp CY23EP05SXC-1H Clock Generators applications.
- 10 Gigabit Ethernet
- Signal frequency synthesis circuits
- High-speed communication applications
- Coherent carrier tracking
- Frequency shifting decodes
- Mechanical devices
- Frequency synthesis
- Vector network analyzers (VNA)
- Computers to manage memory cards
- Medical equipment
