Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Gold, Tin |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Published |
2002 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
Fanout Buffer (Distribution), Zero Delay Buffer |
Terminal Finish |
Matte Tin (Sn) |
Additional Feature |
ALSO OPERATES AT 3.3V SUPPLY |
Subcategory |
Clock Drivers |
Voltage - Supply |
2.5V 3.3V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
2.5V |
Frequency |
220MHz |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
CY23EP05 |
Output |
LVCMOS |
Pin Count |
8 |
Number of Outputs |
5 |
Operating Supply Voltage |
3.3V |
Supply Voltage-Max (Vsup) |
2.7V |
Supply Voltage-Min (Vsup) |
2.3V |
Number of Circuits |
1 |
Nominal Supply Current |
45mA |
Frequency (Max) |
200MHz 220MHz |
Input |
LVCMOS, LVTTL |
Ratio - Input:Output |
1:5 |
PLL |
Yes |
Differential - Input:Output |
No/No |
Propagation Delay (tpd) |
0.2 ns |
Width |
3.9mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
CY23EP05SXI-1H Overview
In order to package it as a clock IC, the Tube package is used. The 8-SOIC (0.154, 3.90mm Width) package includes this clock generator. This clock generator will sustain a maximum temperature of 260 when reflown. It contains a total of 8 terminations within RF synthesizer. For this clock generator ic, a voltage of 2.5V is required. As the Clock PLL's input, LVCMOS, LVTTL is designed to be used in order to generate the clock signal. 1 circuits are implemented to access the electronic component's full performance. Using this clock-based frequency synthesizer, you can achieve a maximum frequency of 200MHz 220MHz. The Surface Mount allows this electrical component to be easily installed on the panel. It would take a maximum supply voltage of 2.7V to operate this time clock generator. A maximum voltage of 2.3V should be used for this frequency generator for safety reasons. Clock PLL works with 2.5V 3.3V supply voltage provided. Using the test statistics, it is estimated that the ambient temperature should be set to -40°C~85°C. LVCMOS logic levels are supported by this RF synthesizer. As far as electrical parts go, this component can be classified as a Fanout Buffer (Distribution), Zero Delay Buffer component. This clock-generating IC is a 8-bit device designed explicitly for microprocessors. This part number CY23EP05 is related to the following electrical components. The clock PLL has 8 pins that are available. Clock PLL is capable of handling a voltage of 3.3V. And basically, this clock generator is often classified as a kind of Clock Drivers. With ALSO OPERATES AT 3.3V SUPPLY, this clock generator produces better clock signals. Clock PLL is facilitated with 5 signal outputs to magnify output frequency as high as possible. At a frequency of 220MHz, frequency generator is capable of achieving high efficiency.
CY23EP05SXI-1H Features
Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 2.5V
Operating supply voltage of 3.3V
CY23EP05SXI-1H Applications
There are a lot of Cypress Semiconductor Corp CY23EP05SXI-1H Clock Generators applications.
- MRI
- Clock generation systems
- Local oscillators (LOs)
- Electronic countermeasures
- Automatic control system test
- Communication infrastructure
- DVD recorders
- Symbol synchronization
- Remote telemetry and instrumentation
- Mechanical devices