CY23EP05SXI-1T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Fanout Buffer (Distribution), Zero Delay Buffer |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES AT 3.3V SUPPLY |
| Subcategory | Clock Drivers |
| Voltage - Supply | 2.5V 3.3V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY23EP05 |
| Output | LVCMOS |
| Pin Count | 8 |
| Number of Outputs | 5 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 2.7V |
| Supply Voltage-Min (Vsup) | 2.3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 45mA |
| Frequency (Max) | 133MHz 167MHz |
| Input | LVCMOS, LVTTL |
| Ratio - Input:Output | 1:5 |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Propagation Delay (tpd) | 0.2 ns |
| fmax-Min | 220 MHz |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY23EP05SXI-1T Overview
The Tape & Reel (TR) method is used for packaging clock ICs. In the 8-SOIC (0.154, 3.90mm Width) package, there is an embedded clock generator. Under reflowing process, this clock generator ic is able to sustain a maximum temperature of 260. In it, there are 8 terminations to be found. Clock generator ics require a voltage of 2.5V. This Clock PLL will be fed by LVCMOS, LVTTL as its input. An implementation of 1 circuits is required in order to fully utili1e the capabilities of the electrical part. An up to 133MHz 167MHz frequency is provided by this clock-based RF synthesizer. The Surface Mount allows the electrical component to be installed conveniently on the panel. It would take a maximum supply voltage of 2.7V to operate this time clock generator. For safety reasons, this frequency synthesizer should have a voltage supply above 2.3V. Clock generator ic works with 2.5V 3.3V. As determined by the test statistics, the ambient temperature should be set to -40°C~85°C. A frequency synthesizer which is compatible with the LVCMOS logic levels is presented here. As far as this electronic part is concerned, it can be classified as a Fanout Buffer (Distribution), Zero Delay Buffer component. It is a 8-bit IC that is designed for microprocessors specifically. It is possible to find its related electronic parts by searching for the base part number CY23EP05. The clock PLL has 8 pins that are available. Supply voltage 3.3V is what time clock generator can handle. Clock Drivers-type frequency generators are usually classified as this type. The frequency generator has a ALSO OPERATES AT 3.3V SUPPLY feature to improve the output of clock signals. The frequency synthesizer features 5 signal outputs to ensure as high a frequency as possible.
CY23EP05SXI-1T Features
Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 2.5V
Operating supply voltage of 3.3V
CY23EP05SXI-1T Applications
There are a lot of Cypress Semiconductor Corp CY23EP05SXI-1T Clock Generators applications.
- Remote telemetry and instrumentation
- Digital logic circuits
- Broadcast communication
- Wireless handsets
- Automatic control
- Multi-function printers
- Wireless base station for LTE, LTE-advanced
- Cellular/4G
- Line cards used in telephone exchange
- Walkie-talkies
