Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Gold, Tin |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
0°C~70°C |
Packaging |
Tube |
Published |
2002 |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
16 |
Type |
Fanout Buffer (Distribution), Zero Delay Buffer |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Additional Feature |
ALSO OPERATES AT 3.3V SUPPLY |
Subcategory |
Clock Drivers |
Voltage - Supply |
2.5V 3.3V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
2.5V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
CY23EP09 |
Output |
LVCMOS |
Pin Count |
16 |
Number of Outputs |
9 |
Operating Supply Voltage |
3.3V |
Supply Voltage-Max (Vsup) |
2.7V |
Supply Voltage-Min (Vsup) |
2.3V |
Number of Circuits |
1 |
Nominal Supply Current |
45mA |
Max Supply Current |
45mA |
Frequency (Max) |
133MHz 167MHz |
Input |
LVCMOS, LVTTL |
Ratio - Input:Output |
1:9 |
PLL |
Yes with Bypass |
Differential - Input:Output |
No/No |
Propagation Delay (tpd) |
4.4 ns |
Height |
1.478mm |
Length |
9.98mm |
Width |
3.987mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
CY23EP09SXC-1 Overview
As a clock IC, it uses the Tube package. The 16-SOIC (0.154, 3.90mm Width) package embeds this Clock PLL. Frequency generator is capable of operating at a maximum temperature of 260 when reflowing. It contains 16 terminations that can be found in frequency synthesizer. A voltage of 2.5V should be applied to this electronic frequency generator. There is a Clock PLL called LVCMOS, LVTTL which is designed to be the input to this clock generator. Using 1 circuits, the electronic part's full performance can be accessed. It provides a maximum frequency of 133MHz 167MHz. PLL clock is mounted in the way of Surface Mount. Clock generators can take up to 2.7V of power as a maximum supply voltageA maximum voltage of 2.3V should be used for this frequency generator for safety reasons. As long as you provide 2.5V 3.3V supply voltage, it will work. As determined by the test statistics, the ambient temperature should be set to 0°C~70°C. LVCMOS is designed for clock generator's output. This electronic component can be classified as a Fanout Buffer (Distribution), Zero Delay Buffer. This clock-generating IC is a 16-bit device designed explicitly for microprocessors. This part number CY23EP09 is related to the following electrical components. A 16 pin is available on the clock PLL. There is a maximum supply voltage of 3.3V that this analog clock generator can handle. A Clock Drivers clock generator is essentially what this device is. The frequency generator has a ALSO OPERATES AT 3.3V SUPPLY feature to improve the output of clock signals. Clock PLL has 9 signal outputs to maximi9e output frequency. During this clock generator operation, a maximum current of 45mA is supplied.
CY23EP09SXC-1 Features
Available in the 16-SOIC (0.154, 3.90mm Width)
Supply voltage of 2.5V
Operating supply voltage of 3.3V
CY23EP09SXC-1 Applications
There are a lot of Cypress Semiconductor Corp CY23EP09SXC-1 Clock Generators applications.
- Frequency shifting decodes
- Microwave backhaul IF
- Wide area power system
- Frequency synthesis
- Navigation, positioning and surveillance system for aircraft, ships and ships
- Notebooks
- Clock synchronization
- Closed circuit systems
- Test equipment
- Tracking filters