Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Gold, Tin |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Published |
2002 |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
16 |
Type |
Fanout Buffer (Distribution), Zero Delay Buffer |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Additional Feature |
ALSO OPERATES AT 3.3V SUPPLY |
Subcategory |
Clock Drivers |
Voltage - Supply |
2.5V 3.3V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
2.5V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
CY23EP09 |
Output |
LVCMOS |
Pin Count |
16 |
Number of Outputs |
9 |
Operating Supply Voltage |
3.3V |
Supply Voltage-Max (Vsup) |
2.7V |
Supply Voltage-Min (Vsup) |
2.3V |
Number of Circuits |
1 |
Nominal Supply Current |
45mA |
Frequency (Max) |
200MHz 220MHz |
Input |
LVCMOS, LVTTL |
Ratio - Input:Output |
1:9 |
PLL |
Yes with Bypass |
Differential - Input:Output |
No/No |
Propagation Delay (tpd) |
4.4 ns |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
CY23EP09SXI-1H Overview
A clock integrated circuit is packaged in a Tube-shaped package because it is for use as a clock. There is a clock generator embedded in the 16-SOIC (0.154, 3.90mm Width) package. When reflowed, this frequency generator can withstand a maximum temperature of 260. There are a total of 16 terminations in this file. This time clock generator should be voltaged at 2.5V. This Clock PLL will be fed by LVCMOS, LVTTL as its input. Using 1 circuits, the electronic part's full performance can be accessed. A clock-based RF synthesizer that provides a max frequency of 200MHz 220MHz is available. Because of the Surface Mount, clock PLL can be easily mounted on the panel. There is a maximum voltage of 2.7V for this clock generator. For safety reasons, this frequency generator's supply voltage should remain above 2.3V. There should be 2.5V 3.3V provided with this RF synthesizer. By calculating the test statistics, -40°C~85°C is the appropriate ambient temperature. LVCMOS logic levels are supported by this RF synthesizer. It is possible to classify this electronic component as a Fanout Buffer (Distribution), Zero Delay Buffer. The clock-generating IC is a 16-bit device designed specifically for microprocessors. You can find related electrical components to the base part number CY23EP09. It is possible to connect to the PLL via 16 pins. Supply voltage 3.3V is what clock generator can handle. In general, this clock PLL is considered a Clock Drivers device. For better clock signal output, this clock PLL is featured with ALSO OPERATES AT 3.3V SUPPLY. The output frequency can be amplified as high as possible with its 9 signal outputs.
CY23EP09SXI-1H Features
Available in the 16-SOIC (0.154, 3.90mm Width)
Supply voltage of 2.5V
Operating supply voltage of 3.3V
CY23EP09SXI-1H Applications
There are a lot of Cypress Semiconductor Corp CY23EP09SXI-1H Clock Generators applications.
- Mixed mode (analog and digital) applications
- Wireless handsets
- Aerospace and defense
- Laptops
- Frequency synthesis
- Skew suppression
- PMR (Professional Mobile Radio)
- Cellular/4G
- Cell phones
- FPGA and processor clocks