CY23EP09SXI-1HT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Type | Fanout Buffer (Distribution), Zero Delay Buffer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO OPERATES AT 3.3V SUPPLY |
| Subcategory | Clock Drivers |
| Voltage - Supply | 2.5V 3.3V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY23EP09 |
| Output | LVCMOS |
| Pin Count | 16 |
| Number of Outputs | 9 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 2.7V |
| Supply Voltage-Min (Vsup) | 2.3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 45mA |
| Frequency (Max) | 200MHz 220MHz |
| Input | LVCMOS, LVTTL |
| Ratio - Input:Output | 1:9 |
| PLL | Yes with Bypass |
| Differential - Input:Output | No/No |
| Propagation Delay (tpd) | 4.4 ns |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY23EP09SXI-1HT Overview
As a clock IC, it is packaged by the Tape & Reel (TR) method. The 16-SOIC (0.154, 3.90mm Width) package contains this clock generator. This clock generator will sustain a maximum temperature of 260 when reflown. It contains 16 terminations that can be found in frequency synthesizer. Basically, a voltage of 2.5V should be applied to this electronic frequency generator. The input of this clock generator is designed to be LVCMOS, LVTTL. To access the full performance of the electronic component, 1 circuits are implemented. It provides a maximum frequency of 200MHz 220MHz. The Surface Mount allows the electrical component to be installed conveniently on the panel. Clock PLL is capable of receiving a maximum of 2.7V as a supply voltage. For safety reasons, this frequency synthesizer should have a voltage supply above 2.3V. There are 2.5V 3.3V different supply voltages that can be provided for this RF synthesizer. The temperature should be set at -40°C~85°C to ensure reliable performance. The frequency synthesizer in this product is compatible with all levels of LVCMOS logic. An electrical part such as this one can be classified as a Fanout Buffer (Distribution), Zero Delay Buffer component. Microprocessor-specific clock PLL with 16 bits. The related electronic parts of part number CY23EP09 are listed below. The clock PLL has 16 pins that are available. Electronic frequency generator can handle voltages up to 3.3V. This clock generator can be classified as a kind of Clock Drivers in general. There is a ALSO OPERATES AT 3.3V SUPPLY feature on this frequency generator in order to produce a better clock signal. 9 signal outputs enable clock PLL to magnify output frequency as high as possible.
CY23EP09SXI-1HT Features
Available in the 16-SOIC (0.154, 3.90mm Width)
Supply voltage of 2.5V
Operating supply voltage of 3.3V
CY23EP09SXI-1HT Applications
There are a lot of Cypress Semiconductor Corp CY23EP09SXI-1HT Clock Generators applications.
- Coherent detection of the signal
- Local oscillator source in receiver
- Fiber Channel
- Skew suppression
- Wireless base station for LTE, LTE-advanced
- Cable television converter boxes
- Threshold extension
- Cell phones
- Mechanical devices
- Walkie-talkies
