CY23EP09ZXC-1H
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Type | Fanout Buffer (Distribution), Zero Delay Buffer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO OPERATES AT 3.3V SUPPLY |
| Subcategory | Clock Drivers |
| Voltage - Supply | 2.5V 3.3V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY23EP09 |
| Output | LVCMOS |
| Pin Count | 16 |
| Number of Outputs | 9 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 2.7V |
| Supply Voltage-Min (Vsup) | 2.3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 45mA |
| Frequency (Max) | 200MHz 220MHz |
| Input | LVCMOS, LVTTL |
| Ratio - Input:Output | 1:9 |
| PLL | Yes with Bypass |
| Differential - Input:Output | No/No |
| Propagation Delay (tpd) | 4.4 ns |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY23EP09ZXC-1H Overview
As a clock IC, it uses the Tube package. There is a clock generator embedded in the 16-TSSOP (0.173, 4.40mm Width) package. This clock generator ic can sustain 260 degrees of temperature during reflowing. There are a total of 16 terminations in this file. The clock generator ic should be grounded with a voltage of 2.5V. In this clock generator, LVCMOS, LVTTL is used as the input to the clock. To access the electronic component's full performance, 1 circuits are implemented. Using this clock-based frequency synthesizer, you can achieve a maximum frequency of 200MHz 220MHz. Thanks to the Surface Mount, this electric component can easily be installed on a panel. 2.7V would be the maximum supply voltage for this clock generator. A maximum voltage of 2.3V should be used for this frequency generator for safety reasons. This clock PLL works with a supply voltage of 2.5V 3.3V. Based on the test statistics, an ambient temperature of 0°C~70°C should be set. I would like to present to you a frequency synthesizer that is compatible with LVCMOS logic levels. This electronic component is usually classified as a Fanout Buffer (Distribution), Zero Delay Buffer component. Clock PLL is equipped with 16 pin count. This part number is related to its related electronic parts. There are 16 pins on the frequency generators that are available for use. Supply voltage 3.3V is what time clock generator can handle. The device is usually classified as a type of Clock Drivers device. With ALSO OPERATES AT 3.3V SUPPLY, this clock generator produces better clock signals. 9 signal outputs allow for maximi9ation of output frequency.
CY23EP09ZXC-1H Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 2.5V
Operating supply voltage of 3.3V
CY23EP09ZXC-1H Applications
There are a lot of Cypress Semiconductor Corp CY23EP09ZXC-1H Clock Generators applications.
- Picocells, femtocells and small cells
- Bluetooth receivers
- Smartphones
- Automatic test equipment
- Walkie-talkies
- Tracking filters
- Signal demodulation
- PCI express cards
- CB radios
- FM demodulation networks for FM operations
