CY23EP09ZXC-1HT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Type | Fanout Buffer (Distribution), Zero Delay Buffer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO OPERATES AT 3.3V SUPPLY |
| Subcategory | Clock Drivers |
| Voltage - Supply | 2.5V 3.3V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY23EP09 |
| Output | LVCMOS |
| Pin Count | 16 |
| Number of Outputs | 9 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 2.7V |
| Supply Voltage-Min (Vsup) | 2.3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 45mA |
| Frequency (Max) | 200MHz 220MHz |
| Input | LVCMOS, LVTTL |
| Ratio - Input:Output | 1:9 |
| PLL | Yes with Bypass |
| Differential - Input:Output | No/No |
| Propagation Delay (tpd) | 4.4 ns |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY23EP09ZXC-1HT Overview
Tape & Reel (TR)-method packaging is used for clock ICs. As part of the 16-TSSOP (0.173, 4.40mm Width) package, this clock generator is embedded. This clock generator will sustain a maximum temperature of 260 when reflown. In it, there are 16 terminations to be found. This time clock generator should be voltaged at 2.5V. It is designed that the Clock PLL's input should be LVCMOS, LVTTL. There are 1 circuits implemented in order to achieve full performance from this electronic part. It provides a maximum frequency of 200MHz 220MHz. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. It would take a maximum supply voltage of 2.7V to operate this time clock generator. In order to maintain safety, this frequency generator should be supplied with voltages above 2.3V. As long as there are 2.5V 3.3V supply voltages provided, clock generator ic should work. Test statistics estimate a temperature of 0°C~70°C, which should be set as the ambient temperature. It's compatible with LVCMOS logic levels. It is possible to classify this electronic component as a Fanout Buffer (Distribution), Zero Delay Buffer. It is a 16-bit clock PLL designed specifically for microprocessors. These related electrical parts are available for the base part number CY23EP09. PF synthesizers is equipped with 16 pins. There is a maximum supply voltage of 3.3V that electronic frequency generator can handle. As such, it is often referred to as a kind of Clock Drivers clock PLL. The frequency generator has a ALSO OPERATES AT 3.3V SUPPLY feature to improve the output of clock signals. 9 signal outputs maximi9e the output frequency.
CY23EP09ZXC-1HT Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 2.5V
Operating supply voltage of 3.3V
CY23EP09ZXC-1HT Applications
There are a lot of Cypress Semiconductor Corp CY23EP09ZXC-1HT Clock Generators applications.
- Cable television converter boxes
- Notebooks
- Sampling clocks for ADC and DAC
- Infotainment systems
- High-frequency induction heating
- Closed circuit systems
- Signal frequency synthesis circuits
- PCI express cards
- Multiplexing communication
- Microprocessor clock multipliers
