CY23EP09ZXI-1H
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Type | Fanout Buffer (Distribution), Zero Delay Buffer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO OPERATES AT 3.3V SUPPLY |
| Subcategory | Clock Drivers |
| Voltage - Supply | 2.5V 3.3V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Frequency | 220MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY23EP09 |
| Output | LVCMOS |
| Pin Count | 16 |
| Number of Outputs | 9 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 2.7V |
| Supply Voltage-Min (Vsup) | 2.3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 45mA |
| Frequency (Max) | 200MHz 220MHz |
| Input | LVCMOS, LVTTL |
| Ratio - Input:Output | 1:9 |
| PLL | Yes with Bypass |
| Differential - Input:Output | No/No |
| Propagation Delay (tpd) | 4.4 ns |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY23EP09ZXI-1H Overview
It is packaged using the Tube method since it is a clock IC. A Clock PLL is included with the 16-TSSOP (0.173, 4.40mm Width) package. Frequency generator is capable of operating at a maximum temperature of 260 when reflowing. In it, there are 16 terminations to be found. Clock generator ics require a voltage of 2.5V. This Clock PLL will be fed by LVCMOS, LVTTL as its input. 1 circuits are used to achieve clock PLL's superior flexibility. There is a maximum frequency of 200MHz 220MHz Max with this clock-based frequency generator. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. Clock generators can take up to 2.7V of power as a maximum supply voltageThis frequency synthesizer requires a supply voltage above 2.3V to be safe. As far as the supply voltage is concerned, clock PLL can be used with 2.5V 3.3V. Based on the test statistics, an ambient temperature of -40°C~85°C should be set. A frequency synthesizer which is compatible with the LVCMOS logic levels is presented here. This electronic component can be classified as a Fanout Buffer (Distribution), Zero Delay Buffer. This clock-generating IC is a 16-bit device designed explicitly for microprocessors. You can find related electrical components to the base part number CY23EP09. There is an available 16 pin on the PLL. Supply voltage 3.3V is what time clock generator can handle. Fundamentally, this is a kind of Clock Drivers clock PLL. The RF synthesizer features ALSO OPERATES AT 3.3V SUPPLY for improved clock signal output. The output frequency can be amplified as high as possible with its 9 signal outputs. By operating at a frequency of 220MHz, RF synthesizer is able to reali220MHze high efficiency.
CY23EP09ZXI-1H Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 2.5V
Operating supply voltage of 3.3V
CY23EP09ZXI-1H Applications
There are a lot of Cypress Semiconductor Corp CY23EP09ZXI-1H Clock Generators applications.
- Mixed mode (analog and digital) applications
- Instrument
- Bit synchronization
- Satellite receivers
- Microwave backhaul IF
- Automatic control system test
- Notebooks
- Navigation, positioning and surveillance system for aircraft, ships and ships
- Modems
- Smartphones
