CY23EP09ZXI-1HT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Type | Fanout Buffer (Distribution), Zero Delay Buffer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO OPERATES AT 3.3V SUPPLY |
| Subcategory | Clock Drivers |
| Voltage - Supply | 2.5V 3.3V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY23EP09 |
| Output | LVCMOS |
| Pin Count | 16 |
| Number of Outputs | 9 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 2.7V |
| Supply Voltage-Min (Vsup) | 2.3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 45mA |
| Frequency (Max) | 200MHz 220MHz |
| Input | LVCMOS, LVTTL |
| Ratio - Input:Output | 1:9 |
| PLL | Yes with Bypass |
| Differential - Input:Output | No/No |
| Propagation Delay (tpd) | 4.4 ns |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY23EP09ZXI-1HT Overview
The Tape & Reel (TR) method is used for packaging clock ICs. Clock PLL is embedded in the 16-TSSOP (0.173, 4.40mm Width) package. The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible. 16 terminations can be found in frequency generators. To operate this time clock generator, 2.5V voltage should be applied. There is a Clock PLL called LVCMOS, LVTTL which is designed to be the input to this clock generator. For a full understanding of the electronic part's performance, 1 circuits are implemented. There is a maximum frequency of 200MHz 220MHz Max with this clock-based frequency generator. Thanks to the Surface Mount, this electric component can easily be installed on a panel. The maximum voltage this clock PLL can handle is 2.7V. Safety considerations dictate that the supply voltage for this frequency synthesizer should be greater than 2.3V. As long as you provide 2.5V 3.3V supply voltage, it will work. By calculating the test statistics, -40°C~85°C is the appropriate ambient temperature. LVCMOS is designed for clock generator's output. Fanout Buffer (Distribution), Zero Delay Buffer is the type of electrical part that this component is classified as. It is a 16-bit clock PLL designed specifically for microprocessors. It is possible to find its related electronic parts by searching for the base part number CY23EP09. There are 16 pins on the frequency generator that are available for use. There is a maximum supply voltage of 3.3V that electronic frequency generator can handle. Fundamentally, this is a kind of Clock Drivers clock PLL. A frequency synthesizer with ALSO OPERATES AT 3.3V SUPPLY features better clock signal output. 9 signal outputs enable clock PLL to magnify output frequency as high as possible.
CY23EP09ZXI-1HT Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 2.5V
Operating supply voltage of 3.3V
CY23EP09ZXI-1HT Applications
There are a lot of Cypress Semiconductor Corp CY23EP09ZXI-1HT Clock Generators applications.
- Instrument
- Integrated phase noise in aerospace systems
- Radiotelephones
- Sampling clocks for ADC and DAC
- Ports
- Aerospace and defense
- Local oscillator source in receiver
- High-frequency induction heating
- Frequency synthesis
- Myriad digital applications
