CY23FP12OXC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Type | Fanout Buffer (Distribution), Zero Delay Buffer |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Clock Drivers |
| Voltage - Supply | 2.5V 3.3V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 200MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY23FP12 |
| Output | LVCMOS |
| Pin Count | 28 |
| Number of Outputs | 12 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.465V |
| Number of Circuits | 1 |
| Nominal Supply Current | 120mA |
| Input | LVCMOS, LVTTL |
| Ratio - Input:Output | 2:12 |
| Max I(ol) | 0.02 A |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Divider/Multiplier | Yes/No |
| Same Edge Skew-Max (tskwd) | 0.4 ns |
| Height Seated (Max) | 2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY23FP12OXC Overview
The Tube method is used for packaging clock ICs. The 28-SSOP (0.209, 5.30mm Width) package embeds this Clock PLL. This clock generator ic can sustain a maximum temperature of 260 during reflowing. 28 terminations can be found in frequency generators. This time clock generator should be voltaged at 3.3V. This Clock PLL will be fed by LVCMOS, LVTTL as its input. 1 circuits are implemented to access the electronic component's full performance. Due to the Surface Mount-shape, this electronic component can be conveniently installed on the panel. Clock PLL is capable of receiving a maximum of 3.465V as a supply voltage. There are 2.5V 3.3V different supply voltages that can be provided for this RF synthesizer. Based on the test statistics, an ambient temperature of 0°C~70°C should be set. There are several logic levels in LVCMOS logic that can be used with this clock generator. A Fanout Buffer (Distribution), Zero Delay Buffer is a classification for the electronic part in question. There is a 28-bit clock-generating IC built specifically for microprocessors in this frequency generator. According to the base part number CY23FP12, its related parts can be found. PF synthesizers is equipped with 28 pins. There is a maximum supply voltage of 3.3V that clock generator can handle. Fundamentally, this is a kind of Clock Drivers clock PLL. Clock PLL is configured with 12 output. At 0.4 ns Max, this analog clock generator exhibits low timing skew. Using a frequency of 200MHz allows frequency synthesizer to achieve high efficiencies.
CY23FP12OXC Features
Available in the 28-SSOP (0.209, 5.30mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY23FP12OXC Applications
There are a lot of Cypress Semiconductor Corp CY23FP12OXC Clock Generators applications.
- Carrier synchronization in wired communication
- Digital logic circuits
- High-speed communication applications
- Telecommunication systems
- Closed circuit systems
- Instrument
- Multiplexing communication
- Microwave radio
- 10 Gigabit Ethernet
- Wireless base station for LTE, LTE-advanced
