CY23FP12OXI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Type | Fanout Buffer (Distribution), Zero Delay Buffer |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Clock Drivers |
| Voltage - Supply | 2.5V 3.3V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY23FP12 |
| Output | LVCMOS |
| Pin Count | 28 |
| Number of Outputs | 12 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.465V |
| Number of Circuits | 1 |
| Nominal Supply Current | 120mA |
| Frequency (Max) | 166.7MHz |
| Input | LVCMOS, LVTTL |
| Ratio - Input:Output | 2:12 |
| Max I(ol) | 0.02 A |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Divider/Multiplier | Yes/No |
| Same Edge Skew-Max (tskwd) | 0.4 ns |
| Height Seated (Max) | 2mm |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY23FP12OXI Overview
Clock ICs are packaged using the Tube method. This clock generator is embedded in the 28-SSOP (0.209, 5.30mm Width) package. When reflowed, this frequency generator can withstand a maximum temperature of 260. 28 terminations can be found in frequency generators. This time clock generator should be voltaged at 3.3V. This Clock PLL will be fed by LVCMOS, LVTTL as its input. An implementation of 1 circuits is required in order to fully utili1e the capabilities of the electrical part. An up to 166.7MHz frequency is provided by this clock-based RF synthesizer. With the Surface Mount, it is easy to install this electric component on the panel. Clock PLL is capable of receiving a maximum of 3.465V as a supply voltage. There are 2.5V 3.3V available for use with this clock PLL. Test statistics estimate a temperature of -40°C~85°C, which should be set as the ambient temperature. It's compatible with LVCMOS logic levels. An electrical part such as this one can be classified as a Fanout Buffer (Distribution), Zero Delay Buffer component. Clock PLL is equipped with 28 pin count. The related electronic parts of part number CY23FP12 are listed below. It is possible to connect to the frequency generators via 28 pins. In terms of the supply voltage, analog clock generator can handle 3.3V volts. A Clock Drivers clock generator is essentially what this device is. 12 signal outputs maximi12e the output frequency. The timing skew of this frequency synthesizer is low at 0.4 nsmax.
CY23FP12OXI Features
Available in the 28-SSOP (0.209, 5.30mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY23FP12OXI Applications
There are a lot of Cypress Semiconductor Corp CY23FP12OXI Clock Generators applications.
- Automatic control system test
- Aerospace and defense
- Smartphones
- Digital circuits
- Tracking filters
- Bluetooth receivers
- Precision auxiliary angle deflection measurement
- Digital HDTV systems
- Wireless handsets
- Antenna automatic tracking
