CY23FP12OXIT
| Parameters | |
|---|---|
| Subcategory | Clock Drivers |
| Voltage - Supply | 2.5V 3.3V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY23FP12 |
| Output | LVCMOS |
| Pin Count | 28 |
| Number of Outputs | 12 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.465V |
| Number of Circuits | 1 |
| Nominal Supply Current | 120mA |
| Frequency (Max) | 166.7MHz |
| Input | LVCMOS, LVTTL |
| Ratio - Input:Output | 2:12 |
| Max I(ol) | 0.02 A |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Divider/Multiplier | Yes/No |
| Same Edge Skew-Max (tskwd) | 0.4 ns |
| Height Seated (Max) | 2mm |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Type | Fanout Buffer (Distribution), Zero Delay Buffer |
| Terminal Finish | Matte Tin (Sn) |
CY23FP12OXIT Overview
This clock IC is packaged using the Tape & Reel (TR) method. In the 28-SSOP (0.209, 5.30mm Width) package, there is an embedded clock generator. This clock generator ic can sustain 260 degrees of temperature during reflowing. It contains 28 terminations that can be found in frequency synthesizer. Basically, this time clock generator needs a voltage of 3.3V. In this case, LVCMOS, LVTTL is designed to be the input of the clock generator. To access the full performance of the electronic component, 1 circuits are implemented. Using this clock-based frequency synthesizer, you can achieve a maximum frequency of 166.7MHz. Because of the Surface Mount, clock PLL can be easily mounted on the panel. It would be possible to supply this clock PLL with 3.465V of power. Clock generators should operate with the voltage supply of 2.5V 3.3V. Using the test statistics, we estimate that the ambient temperature should be -40°C~85°C. LVCMOS is designed for clock generator's output. This is an electronic part that can be classified as a Fanout Buffer (Distribution), Zero Delay Buffer in this case. Clock PLL is equipped with 28 pin count. CY23FP12 is the base part number for finding related electronic parts. A 28 pin is available on the PLL. The supply voltage should be maintained at 3.3V for high efficiency. Fundamentally, this is a kind of Clock Drivers clock PLL. The output frequency can be amplified as high as possible with its 12 signal outputs. As a result of this digital clock generator, there is a low timing skew at 0.4 ns max.
CY23FP12OXIT Features
Available in the 28-SSOP (0.209, 5.30mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY23FP12OXIT Applications
There are a lot of Cypress Semiconductor Corp CY23FP12OXIT Clock Generators applications.
- Radar
- Time to digital converters
- Microprocessor clock multipliers
- Wireless base station for LTE, LTE-advanced
- Radio receivers
- FSK demodulators
- Mixed mode (analog and digital) applications
- Electronic countermeasures
- Satellite receivers
- High-speed communication applications
