CY23S05SXC-1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 1999 |
| Series | Spread Aware™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Fanout Buffer (Distribution), Zero Delay Buffer |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Clock Drivers |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY23S05 |
| Output | LVCMOS |
| Pin Count | 8 |
| Number of Outputs | 5 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 32mA |
| Frequency (Max) | 133.33MHz |
| Family | 23S |
| Input | LVCMOS, LVTTL |
| Ratio - Input:Output | 1:5 |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY23S05SXC-1 Overview
As a clock IC, it uses the Tube package. 8-SOIC (0.154, 3.90mm Width) contains this Clock PLL. A maximum temperature of 260 can be sustained by this clock generator ic during reflowing. There are 8 terminations found in this file. The clock generator ic should be grounded with a voltage of 3.3V. It is designed that the Clock PLL's input should be LVCMOS, LVTTL. It is possible to access the full performance of the electrical part by implementing 1 circuits. This clock-based frequency generator provides a frequency up to 133.33MHz Max. The Surface Mount allows the electrical component to be installed conveniently on the panel. The maximal supply voltage (Vsup) reaches 3.6V. Keeping the supply voltage for this frequency synthesizer above 3V is recommended for safety reasons. There are 3V~3.6V different supply voltages that can be provided for this RF synthesizer. The ambient temperature should be set at 0°C~70°C, which is estimated by the test statistics. LVCMOS logic levels are supported by this RF synthesizer. This electronic component is usually classified as a Fanout Buffer (Distribution), Zero Delay Buffer component. An IC that generates clocks specifically for microprocessors, this clock PLL is 8-bits in si8e. CY23S05 is the base part number for finding related electronic parts. Clock generator is designed with 8 pins. The supply voltage should be maintained at 3.3V for high efficiency. Clock generator can also be included into Clock Drivers. A member of the Spread Aware? series, this electronic component is made of plastic. The frequency synthesizer features 5 signal outputs to ensure as high a frequency as possible. By searching for parts that belong to the 23S family, you can find electronic parts that are similar.
CY23S05SXC-1 Features
Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY23S05SXC-1 Applications
There are a lot of Cypress Semiconductor Corp CY23S05SXC-1 Clock Generators applications.
- Picocells, femtocells and small cells
- Bluetooth transmitters
- Precision auxiliary angle deflection measurement
- High-speed optical transport network (OTN)
- Various decoding circuits
- Frequency synthesis
- PMR (Professional Mobile Radio)
- Media broadcast servers
- Camera systems
- GPS systems
