CY23S05SXI-1T
| Parameters | |
|---|---|
| Number of Outputs | 5 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Frequency (Max) | 133.33MHz |
| Family | 23S |
| Input | LVCMOS, LVTTL |
| Ratio - Input:Output | 1:5 |
| PLL | Yes |
| Differential - Input:Output | No/No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 1999 |
| Series | Spread Aware™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Fanout Buffer (Distribution), Zero Delay Buffer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Clock Drivers |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY23S05 |
| Output | LVCMOS |
| Pin Count | 8 |
CY23S05SXI-1T Overview
As a clock IC, it uses the Tape & Reel (TR) package. There is a clock generator embedded in the 8-SOIC (0.154, 3.90mm Width) package. A maximum temperature of 260 can be sustained by this clock generator ic during reflowing. It contains 8 terminations that can be found in frequency synthesizer. Basically, this time clock generator needs a voltage of 3.3V. This clock generator receives its inputs from LVCMOS, LVTTL, which is designed to be the clock source. To access the electronic component's full performance, 1 circuits are implemented. An up to 133.33MHz frequency is provided by this clock-based RF synthesizer. The Surface Mount allows this electrical component to be easily installed on the panel. The maximal supply voltage (Vsup) reaches 3.6V. Keeping the supply voltage for this frequency synthesizer above 3V is recommended for safety reasons. There are 3V~3.6V different supply voltages that can be provided for this RF synthesizer. Test statistics suggest setting the ambient temperature at -40°C~85°C, which is -40°C~85°C. A frequency synthesizer which is compatible with the LVCMOS logic levels is presented here. This electronic component can be classified into Fanout Buffer (Distribution), Zero Delay Buffer. This clock-generating IC is a 8-bit device designed explicitly for microprocessors. These related electrical parts are available for the base part number CY23S05. PF synthesizers is equipped with 8 pins. The supply voltage should be maintained at 3.3V for high efficiency. Clock generator can also be included into Clock Drivers. A member of the Spread Aware? series, this electronic component is made of plastic. The output frequency is magnified as high as possible with 5 signal outputs. When searching for parts belonging to the 23S family, similar electric components can be found.
CY23S05SXI-1T Features
Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY23S05SXI-1T Applications
There are a lot of Cypress Semiconductor Corp CY23S05SXI-1T Clock Generators applications.
- 10 Gigabit Ethernet
- Pulsed digital systems
- Signal frequency synthesis circuits
- Line cards used in telephone exchange
- PMR (Professional Mobile Radio)
- Signal demodulation
- GPS systems
- Satellite navigation communication
- Mixed mode (analog and digital) applications
- Deep space exploration
