banner_page

CY23S08SXI-1H

3.3V Fanout Buffer (Distribution), Zero Delay Buffer 140MHz CY23S08 Clock Generators 16 Pins 16-SOIC (0.154, 3.90mm Width) 16 Terminals Surface Mount 3V~3.6V Tube


  • Manufacturer: Cypress Semiconductor Corp
  • Nocochips NO: 217-CY23S08SXI-1H
  • Package: 16-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 618
  • Description: 3.3V Fanout Buffer (Distribution), Zero Delay Buffer 140MHz CY23S08 Clock Generators 16 Pins 16-SOIC (0.154, 3.90mm Width) 16 Terminals Surface Mount 3V~3.6V Tube (Kg)

Details

Tags

Parameters
Package / Case 16-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Number of Pins 16
Operating Temperature -40°C~85°C
Packaging Tube
Published 1996
JESD-609 Code e4
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 16
ECCN Code EAR99
Type Fanout Buffer (Distribution), Zero Delay Buffer
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Clock Drivers
Voltage - Supply 3V~3.6V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3.3V
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number CY23S08
Output LVCMOS
Pin Count 16
Number of Outputs 8
Operating Supply Voltage 3.3V
Supply Voltage-Max (Vsup) 3.6V
Supply Voltage-Min (Vsup) 3V
Number of Circuits 1
Frequency (Max) 140MHz
Family 23S
Input LVCMOS, LVTTL
Ratio - Input:Output 1:8
PLL Yes with Bypass
Differential - Input:Output No/No
Propagation Delay (tpd) 0.275 ns
Same Edge Skew-Max (tskwd) 0.25 ns
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Contact Plating Gold, Tin
Mounting Type Surface Mount

CY23S08SXI-1H Overview


As a clock IC, it uses the Tube package. 16-SOIC (0.154, 3.90mm Width) contains this Clock PLL. Frequency generator can maintain a maximum temperature of 260 under reflowing conditions. It contains a total of 16 terminations within RF synthesizer. Clock generator ics require a voltage of 3.3V. LVCMOS, LVTTL is designed for clock generator's input. 1 circuits are implemented to access the electronic component's full performance. 140MHz is the maximal value for normal operation. This component can be conveniently installed on the panel thanks to the Surface Mount. It would take a maximum supply voltage of 3.6V to operate this time clock generator. A maximum voltage of 3V should be used for this frequency generator for safety reasons. As far as the supply voltage is concerned, clock PLL can be used with 3V~3.6V. Using the test statistics, we estimate that the ambient temperature should be -40°C~85°C. LVCMOS is designed for clock generator's output. This is an electronic part that can be classified as a Fanout Buffer (Distribution), Zero Delay Buffer in this case. In particular, this clock PLL is designed to be used with microprocessors. These related electrical parts are available for the base part number CY23S08. Clock generator is designed with 16 pins. In terms of the supply voltage, analog clock generator can handle 3.3V volts. Clock Drivers-type frequency generators are usually classified as this type. 8 signal outputs are provided for enhancing output frequency as much as possible. At 0.25 ns Max, this analog clock generator exhibits low timing skew. When searching for parts of the 23S family, similar electronic components will be found.

CY23S08SXI-1H Features


Available in the 16-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V

CY23S08SXI-1H Applications


There are a lot of Cypress Semiconductor Corp CY23S08SXI-1H Clock Generators applications.

  • Phase modulation cellular systems
  • Sampling clocks for ADC and DAC
  • Wi-Fi routers
  • Skew suppression
  • Automatic test equipment
  • Signal modulation and demodulation
  • PCI express cards
  • Computers to manage memory cards
  • Navigation, positioning and surveillance system for aircraft, ships and ships
  • Digital circuits

Write a review

Note: HTML is not translated!
    Bad           Good