CY23S08SXI-1HT
| Parameters | |
|---|---|
| Frequency (Max) | 140MHz |
| Family | 23S |
| Input | LVCMOS, LVTTL |
| Ratio - Input:Output | 1:8 |
| PLL | Yes with Bypass |
| Differential - Input:Output | No/No |
| Propagation Delay (tpd) | 0.275 ns |
| Same Edge Skew-Max (tskwd) | 0.25 ns |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 1996 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Fanout Buffer (Distribution), Zero Delay Buffer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Clock Drivers |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY23S08 |
| Output | LVCMOS |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
CY23S08SXI-1HT Overview
As a clock IC, it uses the Tape & Reel (TR) package. A Clock PLL is included with the 16-SOIC (0.154, 3.90mm Width) package. In the reflowing process, this clock generator ic is able to maintain a maximum temperature of 260. There are 16 terminations found in this file. To operate this time clock generator, 3.3V voltage should be applied. There is a Clock PLL called LVCMOS, LVTTL which is designed to be the input to this clock generator. For a full understanding of the electronic part's performance, 1 circuits are implemented. It provides a maximum frequency of 140MHz. Because of the Surface Mount, clock PLL can be easily mounted on the panel. Clock generators can take up to 3.6V of power as a maximum supply voltageIt is safe to use this frequency synthesizer with a supply voltage above 3V. There are 3V~3.6V available for use with this clock PLL. As determined by the test statistics, the ambient temperature should be set to -40°C~85°C. The RF synthesizer is compatible with LVCMOS logic levels. This is an electronic part that can be classified as a Fanout Buffer (Distribution), Zero Delay Buffer in this case. In particular, this clock PLL is designed to be used with microprocessors. This part number CY23S08 is related to the following electrical components. PF synthesizers is equipped with 16 pins. The maximum supply voltage that analog clock generator can handle is 3.3V. In general, this clock PLL is considered a Clock Drivers device. Clock PLL is configured with 8 output. At 0.25 ns Max, this clock generator offers low timing skew. This clock generator belongs to the family of 23S.
CY23S08SXI-1HT Features
Available in the 16-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY23S08SXI-1HT Applications
There are a lot of Cypress Semiconductor Corp CY23S08SXI-1HT Clock Generators applications.
- Time to digital converters
- Cell phones
- Media broadcast servers
- Digital logic circuits
- High-frequency induction heating
- Signal generator
- Televisions
- Vector network analyzers (VNA)
- Fiber Channel
- Clock recovery
