CY23S08ZXC-1H
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Type | Fanout Buffer (Distribution), Zero Delay Buffer |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Clock Drivers |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Base Part Number | CY23S08 |
| Output | LVCMOS |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 70mA |
| Frequency (Max) | 140MHz |
| Family | 23S |
| Input | LVCMOS, LVTTL |
| Ratio - Input:Output | 1:8 |
| PLL | Yes with Bypass |
| Differential - Input:Output | No/No |
| Propagation Delay (tpd) | 0.275 ns |
| Same Edge Skew-Max (tskwd) | 0.25 ns |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY23S08ZXC-1H Overview
In order to package it as a clock IC, the Tube package is used. The 16-TSSOP (0.173, 4.40mm Width) package embeds this Clock PLL. 16 terminations can be found in frequency synthesizer. For this clock generator ic, a voltage of 3.3V is required. LVCMOS, LVTTL is designed for clock generator's input. It is possible to access the full performance of the electrical part by implementing 1 circuits. 140MHz is the maximal value for normal operation. Due to the Surface Mount-shape, this electronic component can be conveniently installed on the panel. The maximal supply voltage this clock generator would take is 3.6V. For safety reasons, this frequency synthesizer should have a voltage supply above 3V. There should be 3V~3.6V provided with this RF synthesizer. Statistics suggest that the ambient temperature be set at 0°C~70°C, which is what is estimated by the test. There are several logic levels in LVCMOS logic that can be used with this clock generator. As far as electrical parts go, this component can be classified as a Fanout Buffer (Distribution), Zero Delay Buffer component. Clock PLL is equipped with 16 pin count. You can find related electrical components to the base part number CY23S08. PF synthesizers is equipped with 16 pins. Time clock generator can handle a voltage of 3.3V as the supply voltage. This clock generator can be classified as a kind of Clock Drivers in general. At 0.25 ns Max, this clock generator offers low timing skew. 23S-family clock generators are similar.
CY23S08ZXC-1H Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY23S08ZXC-1H Applications
There are a lot of Cypress Semiconductor Corp CY23S08ZXC-1H Clock Generators applications.
- Microwave backhaul IF
- 1 Gigabit Ethernet
- Communication infrastructure
- High-speed communication applications
- Radiotelephones
- Automatic control system test
- Time to digital converters
- Tracking filters
- Camera systems
- Computers to manage memory cards
