banner_page

CY23S09SXC-1T

3.3V Fanout Buffer (Distribution), Zero Delay Buffer 133.33MHz CY23S09 Clock Generators 16 Pins 16-SOIC (0.154, 3.90mm Width) 16 Terminals Surface Mount 3V~3.6V Tape & Reel (TR)


  • Manufacturer: Cypress Semiconductor Corp
  • Nocochips NO: 217-CY23S09SXC-1T
  • Package: 16-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 797
  • Description: 3.3V Fanout Buffer (Distribution), Zero Delay Buffer 133.33MHz CY23S09 Clock Generators 16 Pins 16-SOIC (0.154, 3.90mm Width) 16 Terminals Surface Mount 3V~3.6V Tape & Reel (TR) (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mounting Type Surface Mount
Package / Case 16-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Number of Pins 16
Operating Temperature 0°C~70°C
Packaging Tape & Reel (TR)
Published 1999
JESD-609 Code e4
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 16
Type Fanout Buffer (Distribution), Zero Delay Buffer
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Clock Drivers
Voltage - Supply 3V~3.6V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3.3V
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number CY23S09
Output LVCMOS
Pin Count 16
Number of Outputs 9
Operating Supply Voltage 3.3V
Supply Voltage-Max (Vsup) 3.6V
Supply Voltage-Min (Vsup) 3V
Number of Circuits 1
Nominal Supply Current 32mA
Frequency (Max) 133.33MHz
Family 23S
Input LVCMOS, LVTTL
Ratio - Input:Output 1:9
Max I(ol) 0.008 A
PLL Yes with Bypass
Differential - Input:Output No/No
Propagation Delay (tpd) 0.35 ns
Same Edge Skew-Max (tskwd) 0.25 ns
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

CY23S09SXC-1T Overview


A clock integrated circuit is packaged in a Tape & Reel (TR)-shaped package because it is for use as a clock. This clock generator is embedded in the 16-SOIC (0.154, 3.90mm Width) package. This clock generator ic can sustain 260 degrees of temperature during reflowing. There are 16 terminations found in the file. For this clock generator ic, a voltage of 3.3V is required. As the Clock PLL's input, LVCMOS, LVTTL is designed to be used in order to generate the clock signal. Using 1 circuits, the electronic part's full performance can be accessed. RF synthesizers based on this clock provide frequencies up to 133.33MHz maximum. With the Surface Mount, it is easy to install this electric component on the panel. The maximal supply voltage this clock generator would take is 3.6V. A maximum voltage of 3V should be used for this frequency generator for safety reasons. Clock generator ic works with 3V~3.6V. Based on the test statistics, an ambient temperature of 0°C~70°C should be set. This is a clock generator compatible with LVCMOS logic levels. A Fanout Buffer (Distribution), Zero Delay Buffer is a classification for the electronic part in question. In particular, this clock PLL is designed to be used with microprocessors. It is possible to find its related electronic parts by searching for the base part number CY23S09. It is possible to connect to the PLL via 16 pins. Supply voltage 3.3V is what time clock generator can handle. Clock generator can also be included into Clock Drivers. The frequency synthesizer features 9 signal outputs to ensure as high a frequency as possible. The timing skew of this frequency synthesizer is low at 0.25 nsmax. By searching for the 23S family, it is possible to find similar electrical components.

CY23S09SXC-1T Features


Available in the 16-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V

CY23S09SXC-1T Applications


There are a lot of Cypress Semiconductor Corp CY23S09SXC-1T Clock Generators applications.

  • Skew suppression
  • HDD recorders
  • Bluetooth receivers
  • Tracking filters
  • Sampling clocks for ADC and DAC
  • Frequency synthesis
  • Camera systems
  • GPS systems
  • Coherent detection of the signal
  • Infotainment systems

Write a review

Note: HTML is not translated!
    Bad           Good