Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Gold, Tin |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
0°C~70°C |
Packaging |
Tube |
Published |
1999 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
16 |
Type |
Fanout Buffer (Distribution), Zero Delay Buffer |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Clock Drivers |
Voltage - Supply |
3V~3.6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
CY23S09 |
Output |
LVCMOS |
Pin Count |
16 |
Number of Outputs |
9 |
Operating Supply Voltage |
3.3V |
Supply Voltage-Max (Vsup) |
3.6V |
Supply Voltage-Min (Vsup) |
3V |
Number of Circuits |
1 |
Nominal Supply Current |
32mA |
Frequency (Max) |
133.33MHz |
Family |
23S |
Input |
LVCMOS, LVTTL |
Ratio - Input:Output |
1:9 |
PLL |
Yes with Bypass |
Differential - Input:Output |
No/No |
Propagation Delay (tpd) |
0.35 ns |
Same Edge Skew-Max (tskwd) |
0.25 ns |
Length |
5mm |
Width |
4.4mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
CY23S09ZXC-1H Overview
This clock IC is packaged using the Tube method. Clock PLL is embedded in the 16-TSSOP (0.173, 4.40mm Width) package. Frequency generator is capable of operating at a maximum temperature of 260 when reflowing. In it, there are 16 terminations to be found. To operate this time clock generator, 3.3V voltage should be applied. It is designed that the Clock PLL's input should be LVCMOS, LVTTL. For a full understanding of the electronic part's performance, 1 circuits are implemented. This clock-based frequency generator provides a frequency up to 133.33MHz Max. Thanks to the Surface Mount, this electric component can easily be installed on a panel. Clock generators can take up to 3.6V of power as a maximum supply voltageFor safety reasons, this frequency generator's supply voltage should remain above 3V. As far as the supply voltage is concerned, clock PLL can be used with 3V~3.6V. Test statistics suggest setting the ambient temperature at 0°C~70°C, which is 0°C~70°C. There are several logic levels in LVCMOS logic that can be used with this clock generator. An electrical part such as this one can be classified as a Fanout Buffer (Distribution), Zero Delay Buffer component. The clock-generating IC is a 16-bit device designed specifically for microprocessors. Related electrical parts can be found for the base part number CY23S09. There is an available 16 pin on the PLL. Supply voltage 3.3V is what time clock generator can handle. This clock generator can be classified as a kind of Clock Drivers in general. Clock PLL is facilitated with 9 signal outputs to magnify output frequency as high as possible. The maximal same edge skew (tskwd) can not be exceeded. If you search for the 23S family of parts, you will be able to find similar electrical parts.
CY23S09ZXC-1H Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY23S09ZXC-1H Applications
There are a lot of Cypress Semiconductor Corp CY23S09ZXC-1H Clock Generators applications.
- Digital circuits
- Ports
- Electronic countermeasures
- MRI
- Precision auxiliary angle deflection measurement
- Integrated phase noise in aerospace systems
- Microprocessor clock multipliers
- PMR (Professional Mobile Radio)
- Aerospace and defense
- Radio receivers