Parameters |
Factory Lead Time |
1 Week |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
0°C~70°C |
Packaging |
Tape & Reel (TR) |
Published |
1999 |
JESD-609 Code |
e3 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
16 |
Type |
Fanout Buffer (Distribution), Zero Delay Buffer |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Clock Drivers |
Voltage - Supply |
3V~3.6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
CY23S09 |
Output |
LVCMOS |
Pin Count |
16 |
Number of Outputs |
9 |
Operating Supply Voltage |
3.3V |
Supply Voltage-Max (Vsup) |
3.6V |
Supply Voltage-Min (Vsup) |
3V |
Number of Circuits |
1 |
Nominal Supply Current |
32mA |
Frequency (Max) |
133.33MHz |
Family |
23S |
Input |
LVCMOS, LVTTL |
Ratio - Input:Output |
1:9 |
PLL |
Yes with Bypass |
Differential - Input:Output |
No/No |
Propagation Delay (tpd) |
0.35 ns |
Same Edge Skew-Max (tskwd) |
0.25 ns |
Length |
5mm |
Width |
4.4mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
CY23S09ZXC-1HT Overview
In order to package it as a clock IC, the Tape & Reel (TR) package is used. The 16-TSSOP (0.173, 4.40mm Width) package includes this clock generator. In the reflowing process, this clock generator ic is able to maintain a maximum temperature of 260. In it, there are 16 terminations to be found. This time clock generator should be voltaged at 3.3V. A clock generator's input is called LVCMOS, LVTTL and it is designed as the input for this clock generator. For a full understanding of the electronic part's performance, 1 circuits are implemented. Providing a maximum frequency of 133.33MHz, this clock-based RF synthesizer is suitable for a variety of applications. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. 3.6V would be the maximum supply voltage for this clock generator. This frequency synthesizer requires a supply voltage above 3V to be safe. Clock PLL works with 3V~3.6V supply voltage provided. Test statistics estimate a temperature of 0°C~70°C, which should be set as the ambient temperature. It's compatible with LVCMOS logic levels. An electrical part such as this one can be classified as a Fanout Buffer (Distribution), Zero Delay Buffer component. There is a 16-bit clock-generating IC built specifically for microprocessors in this frequency generator. This part number CY23S09 is related to the following electrical components. A 16 pin is available on the PLL. In terms of the supply voltage, analog clock generator can handle 3.3V volts. A Clock Drivers clock generator is essentially what this device is. 9 signal outputs maximi9e the output frequency. Low timing skew is offered by this RF synthesizer at maximum 0.25 ns. If you search for the 23S family of parts, you will be able to find similar electrical parts.
CY23S09ZXC-1HT Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY23S09ZXC-1HT Applications
There are a lot of Cypress Semiconductor Corp CY23S09ZXC-1HT Clock Generators applications.
- Digital logic circuits
- Electronic equipment
- MRI
- Vector network analyzers (VNA)
- FM demodulation networks for FM operations
- High-speed communication applications
- Line cards used in telephone exchange
- Microprocessor clock multipliers
- VSAT (Small Ground Satellite Station)
- Local oscillators (LOs)